Jump to content

Fujifilm Releases X-T2 Firmware 4.10 and X-H1 Firmware 1.10


Recommended Posts

After my update, the aperture blades on my 18-55 f/2.8-4 stutter when they try to open and close in autofocus mode. Like if they stop down to f/5.6 to take a picture, when I release the shutter, they hit every stop on the way back to f/2.8 and it takes a long time for it to return to open. 

Link to post
Share on other sites

x-t2 Firmware 4.10

 

​I've noticed something rather disappointing with recording F-log - There is no way to record 4K F-log internally and send a signal to an external viewing monitor(not recording) via HDMI out. This makes x-t2 and x-h1 a non starter for drone capture since the drone needs an hdmi out so it can relay a picture to the ground. I just get a black screen via HDMI - its like having a blind camera operator. Am I missing something? Is there a data limit that wont allow for F-log 4K and hdmi out? Seems like it shouldn't matter since f-log is compressed and non-f-log 4K seems to work just fine. 

 

let me know what you all think.

 

https://www.dropbox.com/s/64ga2bs30ec3za6/fujifloghdmiissue.jpg?dl=0

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...