Jump to content

Do I need the 10-24mm or will my 16mm be enough


Randy Pollock

Recommended Posts

Just throwing this out here for suggestions or insights. I use a X-T2 and currently have a 16mm (as well as other lenses)...I am starting to hike and shoot landscapes mostly of meadows, waterfalls, and occasionally the Smoky mountains.

 

I am a hobbyist who makes enough from photography jobs to pay for my gear and right now I am trying to decide between the new 80mm for macro shots or get the 10-24mm.

 

My question is since I have the 16mm is that enough for landscape (for longer shots I also have the 55-200) or do I need to also get the 10-24mm? I will be shooting more landscapes than macro but if the 16mm will perform what I plan to shoot then I would rather spend my money on the 80mm for taking macro shots on my hiking trips.

Link to post
Share on other sites

Well the 10-24 is a lot more useful than a 16 for the obvious reason that it covers more focal lengths! Only you will know whether your personal style will benefit but I find that a lot of my work makes use of around 20 to 24mm and the longer focal lengths of the 55-200 with occasional use of wider down to 10. I believe that the 10-24 is considerably larger and heavier than the 16 though.

Link to post
Share on other sites

If you're worried about not having anything wide enough, and your budget is a factor, why not try the Samyang/Rokinon 12mm f2? It's a permanent part of my travel kit and I think the IQ is great, comparable to Fuji glass. If you can deal with no autofocus, I think it'll serve you well, especially for the price of $250, it's less than 1/3 the cost of the XF 10-24mm. Protip: Set to infinity, and everything beyond 3 feet is in focus, so if landscapes are your thing, you probably won't have to adjust focus much anyway.

 

Also, it's 2 stops faster. The only negatives I can think of with this lens is noticable light falloff on the edges, especially wide open (depending on your style, this may or may not be negative) and lack of communication with the camera, so no autofocus/EXIF data. Other than that, it's small, light, cheap, fast, and the IQ is good. It's a really good landscape photographer's tool.

 

Flickr has lots of shots taken with it. Check it out.

https://www.flickr.com/search/?text=rokinon%2012mm

and

https://www.flickr.com/search/?text=samyang%2012mm

Link to post
Share on other sites

I reviewed the len from some youtubersand reviewed what everyone said here as well... I ordered the 10-24mm and will shelf the 80mm until maybe next Fall.

 

I did here that with my 16mm I can get as close as 6 inches which isn't macro but would allow me to get some nice woodland floor shots.

 

Thanks everyone for your help.

Link to post
Share on other sites

If you're worried about not having anything wide enough, and your budget is a factor, why not try the Samyang/Rokinon 12mm f2? It's a permanent part of my travel kit and I think the IQ is great, comparable to Fuji glass. If you can deal with no autofocus, I think it'll serve you well, especially for the price of $250, it's less than 1/3 the cost of the XF 10-24mm. Protip: Set to infinity, and everything beyond 3 feet is in focus, so if landscapes are your thing, you probably won't have to adjust focus much anyway.

 

Hi, sorry for hijacking OP's post. I'm also checking out both the fuji 10-24mm and the Samyang 12mm. Both are great, but I don't have the budget to buy both as of now. I like the 12mm since it's faster and lighter, however, my eyes really suck at focusing. I wear eyeglasses, and even with the diopter set, I can't see clearly through the viewfinder. I rely on fast AF to get a shot. I'm just a hobbyist who enjoy taking street photos. Since getting the 23mm f2, it never left my camera. I also like shooting at night with a tripod, sometimes handheld. I know no amount of holding my breath would get me a steady shot with the f4. I also know that if there is a candid scene I would like to take with the f2, I wouldn't be able to do it with the manual focus. With these in mind, which lens would you recommend? I don't know if I can set and forget focus with the Samyang. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...