Jump to content

Which Fuji X-T1 kit should i buy?


pat020282

Recommended Posts

Hey everybody,

 

i want to buy a Fuji X-T1 with one of the kit lenses. 

 

Following lenses are available:

 

18-55

18-135

16-55

10-24

 

I already own following Fuji Primes:

 

23, 27, 35, 56

 

I am also interested in what color would you choose for the X-T1...silver or black?

 

I am open to you recommendations. Thank you very much.

 

Patrick

Link to post
Share on other sites

To me, with that lineup of primes, I would not consider either the 18-55 or 16-55 lenses. They seem redundant and personally If I was shooting in that range I would rather have the prime on.

 

That leaves the question of which do you more frequently shoot: wide or long?

 

I was not aware that the X-T1 was available kitted with the 10-24. But I might be inclined to look at the discounts for each and pick the kit that had the best discount. That is because, personally, I'd like both those lenses eventually :)

 

I tried to decide between silver and black and, for me, I was just unwilling to pay extra for something that was purely cosmetic so chose black. If they were the same price I probably would have gone silver because I think it looks nicer.

 

Mike

Link to post
Share on other sites

If you ever want to have a one lens travel solution go with the 18-135.  Especially with the primes you already own, you could take that lens and your favorite prime for portraits and not need another lens.

 

I went with the 18-55, and although it's a good lens, I have kicked myself repeatedly for not getting the 18-135.  There have been too many times I needed the reach and I had to wait till I got the 55-200 just to have it.

 

Go black...

Link to post
Share on other sites

I take the 18-135 with my primes for the zoom utility and OIS when light is good. I also have the 18-55, which has OIS but duplicates a lot of what the primes give with the exception of very low light, extra shallow depth of field. The reach of the 18-135 is nice if you want to carry an all-in-one lens, have good light, and do not need strong subject isolation.

Link to post
Share on other sites

The 18-55 and 16-55 are optically the best. They are optically indistingishable from the primes, except for the maximum and minimum apertures. The 18-55 is also fairly light. If you want a zoom simply so you don't have to switch lenses as often, those are the lenses to go for.

The 10-24 is alright. It gives you focal length options you don't have and it's optically good. If you simply want to expand your wide-angle options, though, the 14mm and 16mm are both a little sharper and faster. 10-24 isn't really a focal length that is going to adequately replace your primes. This is the lens to get if you want to add to your existing primes as a full kit, it's not a lens to get if you want to leave your primes at home.

The 18-135 is optically the weakest, and for most of its focal length it is the slowest lens. It's also comparatively large and heavy. If you want to expand your focal length options and you want to have just one lens on your camera and never change, this is the one to get. You're swapping quality for convenience.

There's no right option here. All depends on why you want a zoom and what you expect to get out of it compared to your primes.

 

 

As for colour, I'm of the mind that every Fuji looks better in silver. The silver X-T1 is also slightly, slightly more weather-resistant and tougher than the black version. Just bear in mind with the X-T1 that silver comes with an additional cost.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...