Jump to content

56f1.2 occasionally makes humming sound after acquiring focus


Mervyn

Recommended Posts

I recently reacquired the Fuji 56f1.2. It's a fantastic lens and I should never have sold it.

 

However, my new copy of the 56 occasionally makes a humming sound that persists after acquiring focus in AF-S mode. I don't recall my old 56 ever doing this on my X-T2 so now I'm slightly concerned.

 

For the rest there doesn't appear to be anything wrong with it.

 

At about one in a 20 shots, especially at minimum range (though I've also had it happen at infinity), the auto-focus motor keeps humming after acquiring focus. Sometimes it stops after a few seconds, but I've also had occasions where it wouldn't stop until I'd press the focus button again or switch off the camera. It happens in AF-S mode.

 

My question is: do other people with the 56 experience this occasional after-focus hum as well, or could it be that I got a bad copy? And my second question is; could it possibly damage or shorten the lifespan of the lens when the autofocus motor keeps running after acquiring focus? I would hate to have the lens work for two years and then break just after the warranty has expired. And my last question: would you keep it and try your luck, or would you return it to the shop and exchange it for another copy?

 

Edit: Problem solved, see my post below.

Edited by Mervyn
Link to post
Share on other sites

To answer my own questions: Never mind, because I just discovered that my 3 year old 23f1.4 does the exact same thing! Once every 20-30 shots or so I can hear a soft humming sound from the autofocus motor that persists after it has acquired focus in AF-S mode. So I'm relieved. Because it's a new lens I pay extra attention to these things. But because my old 23 does it too, hey, I guess it must be normal. :-)

 

My guess now is that it's not the lenses at all; rather I think it could be the camera (X-T2) that somehow is still giving a small current to the autofocus motor of the lens after having already acquired focus. But it happens only once every 20-30 shots or so, and most often it won't happen at all. I think it's not a physical problem but rather something firmware related. Could be a small bug, but likely nothing too serious. Actually it's a very soft hum, hardly noticeable, but it's there. Much softer then the usual autofocus noise. Did anyone else notice this?

Edited by Mervyn
Link to post
Share on other sites

  • 6 months later...

Hey Mervyn,

 

I think I have the exact same issue on 2 of my 3 lenses: the 16mm 1.4 and 56mm 1.2, but not the 55-200mm.

 

Approximately every 20 times I focus on something with back button AF, single point focus, and instant AF setting set to AF-S, there is a persistent humming sound of the autofocus motor until I either focus again or press the playback button. It is disconcerting for sure.

 

Did you end up living with it on your X-T2? Did it ever escalate into something more? Or did you send your camera back for Fujifilm to take a look?

Link to post
Share on other sites

  • 2 years later...

Ok, an old thread. But I have this as well on my x--e3. Especially with the xf 27mm, but also other lenses. Happens both in AFS and M with back button focus. The humming sound after focusing, and it does not stop before you press again. Happens about after 10-20 focus attempt.  Did you send it in for repair?

Edited by jjesp
spelling
Link to post
Share on other sites

  • 3 years later...

Just chiming in here, I also have this on a X-T5 and a 23mm XF 1.4 R (not the newer model), every 20-30 focus's the motor will just continue to make a noise until you either AEL or AF again (these are both brand new, so was checking to see who else had the issue, relieved its just not just me!)

Here is a video of the "issue", so is this normal? 

Note, this does not occur with the 16mm XF WR 2.8.

Edited by curthard89
added more details
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...