Jump to content
  1. Golden Oxen

    Golden Oxen

  2. Hillsideshortleg

    Hillsideshortleg

  3. teaandcake

    teaandcake

  4. chaaz900

    chaaz900

  5. FenFotos

    FenFotos

  6. bergat

    bergat

  7. milandro

    milandro

  8. Kentman

    Kentman

  9. rokphish

    rokphish

  10. routeswest

    routeswest

  11. cucinaferrari

    cucinaferrari

  12. TClair

    TClair

  13. Gatopardo

    Gatopardo

  14. russw

    russw

  15. gdugic

    gdugic

  16. toiyeumetre

    toiyeumetre

  17. Franko

    Franko

  18. bushwack

    bushwack

  19. JeroenV

    JeroenV

  20. Ilya_p

    Ilya_p

  21. yeemiau

    yeemiau

  22. brusco

    brusco

  23. aleks

    aleks

  24. Shiner

    Shiner

  25. Mike Dunbar

    Mike Dunbar

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...