Jump to content

XT-10 Problem - Random Shutter Firing and more


Recommended Posts

Hi everyone,

Just came across this forum yesterday as I was researching an issue with my XT-10.

Here it is...

When I turn the camera on the shutter fires three times and the external controls no longer work. The focus, manual and auto no longer work either. Basically it seems like its "brain" has gone haywire. When I turn the camera off, the shutter fires once before the camera turns off. If I switch to auto mode I can get into the

menu, but not when it's in manual mode. Has anyone experienced anything like this? Is there possibly a reboot I can do, or as I suspect, I need to get it in to Fuji? (It's still under warranty.) I did buy a new SD card and had put it in the day before the camera broke. I'm traveling in India so I really hope it's not a shotty/fake card that ended up messing up the electronics. Thanks in advance for any ideas and help.

Link to post
Share on other sites

That's definitely not normal behavior.

 

Have you tried with a known good SD card? I doubt a bad card would damage the camera, but obviously a bad card could cause the camera to misbehave while it's installed. You can also try turning the camera on and off without an SD card.

 

Ditto with trying without the lens mounted. The camera should turn on and off just fine with no lens and no SD card.

 

Double-check that your drive mode dial is set to S. It shouldn't be doing that in any position, though. In the burst modes (CL & CH), turning off takes some extra time, but the shutter shouldn't be operating.

 

Look around the viewfinder/LCD for any settings that don't look right. Again, none of them should cause that to happen.

 

Does playback work normally?

 

Have you used Wireless? I've had some quirky behavior if the wireless connection fails during image transfer, but it's always cleared up if I took the battery out and put it back in.

 

You can try resetting the menu settings. Setup menu 1 > Reset. Note there are two separate resets: one for the shooting menu, and one for the setup menu. According to the manual (p. 106 if you have it with you), these will not reset the following:

  • Custom settings
  • Date/Time, including time zone difference for "travel" time
  • Wireless configuration

I'd also pull out the battery and put it back in, although I have no idea if that has any effect aside from the Wireless thing I mentioned. It's easy enough to do.

Link to post
Share on other sites

  • 11 months later...
  • 2 weeks later...

Hi,

I figured out that it was in fact the lens that I was using with the camer that was causing the issue. It was the XF56mm. It had somehow sustained some damage and was thus causing the camera to misfire. I realized this after Intoom my camera in and the repair techs couldn’t repeat the issue. Good luck.

Link to post
Share on other sites

  • 2 years later...

Hello, I have seen everyone's comments, suggestions, and results from their FUJI XT-10 camera's malfunctions. I made my own attempts, deleting pics, trying to get the AEL to work, it won't... and resetting the camera to get me the P in the window frame..but that won't show up. I don't know what else to do. Any suggestions? 

Thanks!

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Because the sensor assembly is moved electrmagnetically. When there is no power it is essentially free moving.
    • Ahoy ye hearties! Hoist ye yon Jolly Roger and Cascade away. NGC 1502 The Jolly Roger Cluster:

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      This is the equivalent of 43 minutes, 40 seconds of exposure. NGC 1502 is a neat little cluster located in the Camelopardalis Constellation. This region of space was thought to be fairly empty by early astronomers, but as you can see, there is a lot there. Kemble's Cascade (a.k.a. Kemble 1) is named for Father Lucian Kemble, a Canadian Franciscan friar who wrote about it to Walter Scott Houston, an author for the Sky And Telescope magazine. Houston named the asterism for Fr. Kemble and the name "stuck". NGC 1501 is the Oyster Nebula. A longer focal length telescope is needed to bring this one into good viewing range, but it is well worth the effort. NGC 1502: https://skyandtelescope.org/online-gallery/ngc-1502/ Camelopardalis Constellation: https://en.wikipedia.org/wiki/Camelopardalis Kemble's Cascade (and NGC 1501: The Oyster Nebula): https://www.constellation-guide.com/kembles-cascade/ Arrrrrr Matey.
    • Looking for input; there are some decent deals and might want to take advantage to expand my lenses for my 100s already own: 110/2 32-64 35-70 100-200 + TC   Shooting mostly family shots, bringing my kit to capture family outings indoors and out. Tracking the 63/43 effective FLs on the two, but has anybody used both? Would the 55 (covered by two zooms right now) be redundant? Would the 80 be too similar in character to my 110 for portraiture?
    • See what I mean? Two instantaneous ads. Worthless.   
×
×
  • Create New...