X-E2s and 50-230 lens using the T shutter setting

[llpastro]

I cannot figure out how to set shutter speeds when the dial is set to T on an X-E2s and a 50-230mm lens when set to manual exposure mode.  The command dial will adjust aperture (there is no aperture setting on the lens).  With other lenses that have an aperture setting, the command dial adjusts shutter fine when in the T mode.  Is this a non supported configuration with this lens?

 

Larry

[milandro]

Go to the menu.

 

The control ( third from the top in the 5th menu) can be set auto+ manual , auto only, manual only.

 

In this way you have shutter priority, manual and program.

Edited July 9, 2017 by milandro

[llpastro]

Thanks for replying.  I checked that out and it works for all shutter settings except "T".  Shutter is locked at 1.6" for some reason.  The command dial controls aperture but nothing appears to change shutter.  With all other lenses there are no issues since aperture is adjusted on the lens.

 

Larry

[milandro]

T is a setting like B . You can change it.

 

 

you need to famiiarize with the manual.

 

http://fujifilm-dsc.com/en/manual/x-pro2/shooting/long_time-exposure/index.html

[Curiojo]

I don't have XC lenses but I guess that you can set the 4 buttons pad to adjust shutter speed when using such lenses.

[milandro]

no, not the arrows

 

it is all in the manual in the link I gave above

Edited July 15, 2017 by milandro

[funsan]

T is a setting like B . You can change it.

 

 

you need to famiiarize with the manual.

 

http://fujifilm-dsc.com/en/manual/x-pro2/shooting/long_time-exposure/index.html

This is the XPro2 manual link not XE2s

 

 

 

Sent from my iPad using Tapatalk

[milandro]

works the same way