Jump to content

Deleting photos on XT-2


Recommended Posts

I'm not aware of a way to delete them simultaneously.  And, IMHO you shouldn't be deleting images on the camera anyway as that "could" cause data corruption on the card.   Just my two cents. 

 

I'd also avoid deleting individual photos but I wonder if there is a key combination like there is with format.

(press and hold delete for an second + press in rear scroll wheel)

Link to post
Share on other sites

A quick format method that I have seen listed several places.  It works great for me.

 

I only format with the trash button.  I do not delete an image or group of images.

 

With camera turned on, hold trash button down for  3 sec. or so.  While continuing to hold down trash button, press the rear command dial  (the wheel at the upper right of the back).  The screen will ask you to choose slot 1 or slot 2.  Follow commands to delete all of the images on the card in that slot.   You must do the process twice, each time choosing the slot with the card you with to format.   Remember this process, by reformatting the card, deletes ALL images on that card.

 

Saves menu diving to clean and format cards.

 

Thanks for the advise on not deleting photos from the SD cards in the camera. What is the general procedure when taking daily photos that I want to upload to my laptop? Should I upload them then reformat the card in the camera each time?

 

With regard to uploading.  I use a card reader.  I download my images for the day and often continue to use the card the next few days, downloading only my new images for each day, usually to a separate folder in my main images folder.  I use 32 GB files which often last me two or three days when I am seriously shooting. \\

 

I shoot only RAW so my slot 2 is a backup.  When I have essentially filled the 32 GB card, i retire it and use another card to finish my trip, event or whatever.  The second slot contains a 256 GB for backup and this card is good to backup at least eight 32 GB cards.  At the end of the trip or event, when I get home I download my images via card reader from my 32 GB cards to my computer and to my backup external drive.  At that point I reformat, using the technique listed above for both all of the 32 GB cards used and the 256 GB back card.

 

I carry sixteen 32 GB cards and two 256 GB cards.  I have yet to run out of space even on a four week trip.

 

Maybe more than you all want to know, but perhaps this is a help or idea trigger for someone.

 

Jerry

Edited by XtJerry
Link to post
Share on other sites

  • 1 month later...

And, IMHO you shouldn't be deleting images on the camera anyway as that "could" cause data corruption on the card.   Just my two cents. 

 

good point!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...