Jump to content

Film, Fuji X, and why I don't care.


abjurina

Recommended Posts

It will be incredible to see one of those server farms in person, you lucky guy

 

But as I said, 4.5 TB of data are nothing, internet is huge, very huge

 

It sounded strange to me too, but megnetic tapes are a really good metod to store "cold data", data that are accessed only once in a time and

don't need high access speeds. And however nowadays a magnetic tape as big as a briefcase can hold more than 150 TB of data, and as CDs they are cheap,

really cheap compared to an hard disk.

Link to post
Share on other sites

to answer the OP's question, I have very little experience with film. I bought a Pentax 35mm point and shoot at 8 years old and used that until I bought my first digital camera in my teens. My uncle gave me an old Pentax SLR that I played with for a while, maybe 12 rolls of film or so. Everything else has been digital. I really liked the 5D Classic.

 

As far as fujifilm cameras, it's really about the camera. I've always loved the look and feel of the old Pentax SLR I was given as well as classic rangefinders I've seen. I really liked the looks of the X100 and the X-Pro1, but didn't buy one. After the X-E1 came out and the price dropped, I ordered it. Partially because it reminded me of a Leica and partially because of the X-Tran sensor. It was somewhat of a love and hate relationship. The EVF lag and sluggish AF annoyed me. I loved everything else about it. I ordered the X-T1 and fell completely in love with it. I've since traded the X-E1 for the X-E2 and bought the X100T and both are excellent. I will probably sell the X-E2 and buy the X-Pro2 when it comes out. I think that will be the perfect combination of features. I love having the OVF and EVF in the X100T. Of course image quality matters too and the fujifilm cameras deliver there as good or better than anyone else.

Link to post
Share on other sites

It will be incredible to see one of those server farms in person, you lucky guy

 

[...]

 

Actually, once the hype wears off, it's just a large open space with tons of PC that's being kept cold that generate a rather loud buzzing sound.

It's not really the physical aspect of it, but really the idea that truck load of data are transiting every single second into that place, most likely more information for any human to be able to learn in a life time.

 

But back on the subject. I got a Fuji mostly because it's small, the IQ is great even on a 3 years old sensor, kinda make me wish my old and aging D5000 could produce anything remotely half good as this, plus I could have full physical controls that I wanted.

Some limitations that I wasn't aware did threw me off, mostly the native ISO being capped at 6400 and same goes for the RAF files not going any higher than that.

 

I was considering the X-T1 against the OM-D EM-5 with the 5 stops in body stabilization and super small lenses but the sensor size was not really much of an improvement with my Nikon 1 being my regular get go camera.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...