Jump to content

Photomicrography with Fujifilm X-System


Stevelink3

Recommended Posts

Greetings! I have an old light microscope that I used to do photomicrography with back in the '70's, and I would like to get back into it, using my Fuji X-Pro 2, However, I need an inexpensive adapter that would faciliate connecting the camera to the ocular (eyepiece) of the microscope. Many years back, I used a simple adapter that had an adjustable ring slider that enabled lenses of various diameters to attach to the microscope, but alas, no longer have access to it. Any suggestions would be greatly appreciated! Thank you! Regards, Steve email: steve@totalqualityphoto.com 

Link to post
Share on other sites

There are expensive Fuji> Microscope adapters

 

https://www.microscopeworld.com/c-130-fuji-camera-microscope-adapter.aspx

 

 

But you can get this cheaper with a little creativity

 

 

I guess that the easiest fix is to buy a T2>microscope adapter and then a T2 >Fujifilm FX

 

https://www.amazon.it/Fujifilm-Adattatore-obiettivo-Concept-X-T10EX1-X-M1/dp/B00OONK2X4

Link to post
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...