Jump to content

SD card is stuck in my XT1 - no movement


tpellicer

Recommended Posts

Hi all, 

 

I hope someone out there can help me figure out how to get my SD card out of my XT1??? First, I'm not new, I've been using 2 XT1's for over a year. Yesterday I shot a big job for an Interior Designer and this morning when I went to copy the images the SD card will not come out. When I push on the card to eject it, there is NO movement, normally it pushes down a little then pops up. This card is stuck, no movement. I'm very nervous as I have a very important job on that card and can't risk looking any images.

 

Please can anyone advise me how to get the card out without damaging the card?

 

Thank you!

Link to post
Share on other sites

Can't really suggest how to remove the card but you can use the Fujifilm PC Autosave software to wirelessly copy your images to a computer (http://www.fujifilm.com/support/digital_cameras/software/pc_autosave/mac/) or (http://www.fujifilm.com/support/digital_cameras/software/pc_autosave/win/). At least you'll have saved your work and can then sort out the camera later. 

Link to post
Share on other sites

it is a known problem, cut a very thin piece of hard plastic or a piece from a playing card ( waxed) and then slide on the side of the contacts ( which are probably causing the card to catch), you should be able to remove it.

 

anyway there are other threads on the subject, as usual, things hardly ever happen to one person alone.

 

http://www.fuji-x-forum.com/topic/3467-card-slot/

Edited by milandro
Link to post
Share on other sites

it is a known problem, cut a very thin piece of hard plastic or a piece from a playing card ( waxed) and then slide on the side of the contacts ( which are probably causing the card to catch), you should be able to remove it.

 

anyway there are other threads on the subject, as usual, things hardly ever happen to one person alone.

 

http://www.fuji-x-forum.com/topic/3467-card-slot/

 

Thank you for your reply, I tried the playing card suggestion, but did not have any luck. I actually figured out you can use some tweezers made by Revlon sold at Target for $5 to grab the card out. Worked perfect and it did not damage my camera or SD Card. Phew.....

Link to post
Share on other sites

Can't really suggest how to remove the card but you can use the Fujifilm PC Autosave software to wirelessly copy your images to a computer (http://www.fujifilm.com/support/digital_cameras/software/pc_autosave/mac/) or (http://www.fujifilm.com/support/digital_cameras/software/pc_autosave/win/). At least you'll have saved your work and can then sort out the camera later. 

Thank you so much I tried this option, but I shot RAW and JPEG and the communication was so slow it kept dropping. I think it would be fine if I was only transferring a few images, but I had 274 images.

Link to post
Share on other sites

  • 4 months later...
  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Some elements in (autofocus) lenses are „floating“, so I guess what you are experiencing is normal.
    • How do I turn off the electronic shutter in the menu - the option is grayed out and I cannot select the mechanical option
    • I'm having trouble finding a way to attach a right-angle viewfinder to the Fuji X-H1 camera. Does anyone have experience with how the angle viewfinder behaves in combination with the EVF? Is the Minolta frame diameter of the right angle viewfinder suitable for attaching to the Fuji XH1 (or XT1, 2, 3, 5)? Does anyone have knowledge about which eyepiece is compatible with the Fuji X system? Thank you in advance for any assistance and information you can provide.    
    • I purchased a gently used XF 80mm f/2.8 aspherical macro for my X-T5. Not being familiar with this lens but having had experience with the Leica T mount 60mm macro and Canon and Zeiss macros, I was surprised that I felt what might be best described as a loose lens element that shifted when I tilted the lens, even before being mounted to the camera. In manual focus mode, the lens is fine, but there is a distinct “wobble” when the lens is in autofocus mode. I reported this to the company (I bought it from KEH), and they agreed this was odd and accepted it back for a full refund. I just got a replacement lens and the same thing is happening. I’ve never had an experience in which I feel a lens element loose inside the housing. Is this normal? Should I return it (again)?
    • Old post but hope this can help. You have to make sure that exp. comp. is set to zero in P, S or A mode before you go in to manual mode. If the comp is set to, let say +5, and this is of the range for the settings in manual mode, twisting the comp dial (left dial) want do any changes. 
×
×
  • Create New...