Jump to content

Recommended Posts

I have used cameras for a long time, none of them weather sealed, without any damage from water or dust.In fact I don't recall it even being an issue.But now I am deciding between an xt2 and xt20 ,mainly on this basis and the $700 price difference.I will never be out in the rain with this gear, but it will be exposed to ordinary dust, and perhaps high tropical humidity.I am leaning towards the xt20.This has perhaps been covered before, but I can't find a search function.

Link to post
Share on other sites

I live in a high humidity area and never had any issues with my X-E2 or X100T with the humidity so you would probably be fine. I think you would need to consider the larger EVF, larger buffer, and the joystick all as considerations too to justify the price difference.

Link to post
Share on other sites

the search engine is at the top right

 

this is one of the threads dealing with this issue, somewhat, I’ve found it with the search engine.

 

http://www.fuji-x-forum.com/topic/348-x-t1x-t10-and-the-weather-sealing-just-a-gimmick-or-a-must-have-feature/

 

most of us have no real use for the weather sealing but, like so many things, many feel that once it is there , not having it is like missing out on something, even if they will most probably never use it.

 

Perhaps it perceived as a sort of emasculation to not have the best , the top, of anything. I’ve often been rebutted that “ i do it because I can afford it” .

 

I personally wouldn’t make it, unless you are sure to use it, the criterium to buy a camera. WR costs a lot of money as opposed to a camera without that.

 

for pennies one can buy a rain hood

 

51borsRvZZL-624x351.jpg

Edited by milandro
Link to post
Share on other sites

Dust will always get in... you open the doors to fit the battery or SD card and there goes the dust resistance!

 

I lot of user experiences with water ingress are down to luck and also the fact that if water gets into the camera, then it might take weeks or even months before corrosion makes a problem

 

If you're chosing between 2 cameras with the same features and the same cost, but one is weather proof, and one isn't pick - pick the weather proof one

 

But in a more real world scenario, its the other features that should draw your attention IMO,

 

I asked Fuji just how weather proof their cameras were and they answered (paraphrasing here) that they can withstand a lot of rain, but dry them off asap because standing water on the body can seep in.

 

That said I wouldn't take my Fuji into the shower or clean it under the tap!

Link to post
Share on other sites

 

 

most people don’t have this kind of accident and I am not sure that it would be wise to buy a WR camera just in case you were ever to spill coffee (by you or someone else) on your camera.

I had, but then with cola. Ouch!

 

OTOH, I have walked outside in a drizzle with my X-E1 several times, and it does not seem to have affected the camera so far.

Link to post
Share on other sites

One could walk around with an helmet just in case one bumps his head.

 

People do, rarely, bump their head...it is not unheard of. Almost none thinks of wearing an helmet just in case.

 

Most of the times would be useless and you will pay for a useless helmet and never use it.

 

The great majority of camera users are weekend warriors shooting pictures of girlfriends and (grand-)children, flowerbeds and sunny landscapes.

 

Despite this, I know of several such weekend warriors having WR camera and lenses ( of course as light efficient as possible and shooting way above ISO 1600 too but no waxing please!).

 

I wonder if they need any of that or they are  just buying everything they think qualifies a proper photographer but then do what they do the way they could have done with any camera.

Edited by milandro
Link to post
Share on other sites

 

 

One could walk around with an helmet just in case one bumps his head.

 

People do, rarely, bump their head...it is not unheard of. Almost none thinks of wearing an helmet just in case.

 

Most of the times would be useless and you will pay for a useless helmet and never use it.

That actually was used as an argument against moped helmets in the 1970's ;)

Link to post
Share on other sites

to not use them as protection when you are NOT driving a bike? :ph34r:

 

If you hit the road at even just 25Km an hour with your unprotected head the weaker one is going to break and I predict it is your head .

 

Anyway put your camera under your jacket and nothing will happen to you.

 

Spend as little as $10 buy a raincoat for cameras like the one above and be happy singing in the rain, no need to spend over $1000 more

Link to post
Share on other sites
  • 1 year later...

Just in the name of accuracy here, folks, none of the cameras under discussion are specified by their manufacturers to be "weather sealed". They are specified to be "weather resistant". I see folks using the term "weather-sealed", and it's inaccurate terminology.

 

Weather-sealed and "weather-resistant are not the same terms or specifications, at all.  This difference in terminology and, more to the point, engineering specification is important, and the reason its that none of these cameras are warranteed for repair for any ingress of water, water vapor, or moisture.

 

Adzman808's comments that the cause of failure modes resulting from moisture ingress is usually corrosion is also accurate, and can take take weeks or months to develop. Since the spread of corrosion in electronics is insidious, there's no way to repair the camera; and it generally has to be scrapped. This is another reason that manufacturers will not warranty the camera to be weather-sealed or against the ingress of moisture. 

Edited by Puma Cat
Link to post
Share on other sites

The one and only occasion I thanked for the "splash resistance" of my (ex-) X-T1 was when I spiiled milkshake over it: after my initial shock I removed battery and card and shook it under a faucet (low water pressure) to "dilute" and remove the milkshake... Left to dry and later in the day it was working perfectly, although milkshake did got into the recesses and under the dials...  :blink:

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Similar Content

    • By Raw confused
      Hello everyone. Hope anyone can guide me as what are the settings to AVOID in order not to be kicked out of RAW heaven?
      I find it confusing....
    • By Argentus
      Hello. I just acquired a EF X20 Flash. I put it on the hot shoe but my XT2 (firmware 4.40) recognizes it as in sync terminal. So I can only acces the Manual mode (the TTL Mode in Flash Settings is grayed out). The flash does fire on Manual, but the TTL is not working.
      When I put the EF X8 Flash, it simply does not even fire. 
      I am on single shot and mechanic shutter.
      Any ideas what might be happening?
      Thanks a lot!

    • By davidknibb
      Not sure if this is the correct forum.
      I have XT20 and  XE1 (and Nikon D300 and D5300)
      2 laptops and a desktop all running Debian Buster (10) and the USB connection works fine.  Also an INTEL NUC running linux MINT and the USB works fine for all 4 cameras.
       
      Now I've bought and assembled a new INTEL NUC and installed Debian 10 again.  I've updated the BIOS
      the D5300 mounts, the D5300 does not mount and needs GTKAM.
      The 2 fuji cameras also need GTKAM - and will not automount.
      Any suggestions as to why the fuji cameras automount on some machines and not others, when the operating system is identical (apart from MINT)
      I've run out of ideas I'm afraid
      Thanks
      David
       
       
       
    • By ibraxwane
      Hi guys,
      Hope you're all well.
      My Fuji randomly stopped turning on a few weeks ago. The screen turns on but not completely (as seen on the attachments). Changing to the Viewfinder also doesn't work, shutter doesn't go off...nothing works. When I turn it off, the screen stays on; I have to remove the battery for my camera to shut down. I've interchanged between my 3 batteries multiple times, and the problem persists.
      I've looked for solutions on forums, but never found anything that fits. Tried updating the firmware through an SD card but the camera won't even turn on for the update to begin in the first place.
       
      Any tips? I'd love to hear from you guys!
      Cheers,
      Ibra


    • By Filand
      Hello,
      I have a quick question regarding the XT-2.  I jumped from a Canon 40D to the XT-2 some time ago.  I love the camera and the feel and output are fantastic for me.  With that said, I have noticed that I have a harder time (on the Fuji) transferring what I see in my viewfinder to my computer screen.  In other words there seems to be a disconnect between what I see in the computer and what I remember being in the viewfinder.  I don't think it is a color or exposure issue, maybe a framing?  Not quite sure.  Do I simply need more experience with the camera?  I'm using a 18-55 for both cameras.  Thank you.
  • Posts

    • Hi,i am looking for some useful video editing software, i hear about the TunesKit Acemovi and Adobe Premier is good,but i am not sure which one is suitable for me,i just need to do something simple like crop,trim,add text,audio,transition,animation.Can you give me some adivice? Here is a vision of a large selection of video editing softwares https://www.xp-pen.com/forum-1595.html Don’t forget that most of the time you can try them free for a while    
    • Fan of X-Trans since P&S days Is RGB or RGGB better mosaics than Fujifilm's GBGGRGRB? How many bits of dynamic range and how few fractions of arc-seconds of resolution are needed for the more common pixel mosaics versus the more complicated X-Trans? Moire decreases with pixel size but photopic luminance for color channels and spacial frequency still matters. Debate, now, for your favorite mosaic!
    • Did you say iPhone? Their external mics usually have 4-conductor cables, which aren't directly compatible with anything else. Try an adapter with 3 conductors.
    • Welcome to  our forum! But I don't see an attached photo.
    • Greetings, Although my friends say I take good photos with my smart phone (Samsung S9+), I have forever wanted to learn the ropes of photography and finally pulled the trigger on a camera I think I can grow with, the X-T4. I'm mostly interested in still nature shots although I do enjoy documenting the dark crevices of a city from time to time. I'm looking forward to learning how to use my camera manually and will enjoy the insights in this forum. Attached is a beach photo I took with my phone. Dale
×
×
  • Create New...