Jump to content

Fuji X-T2 weather-sealing issues?


jmijares

Recommended Posts

Anyone else have similar issues like I described below?

 

Yesterday it was a rainy day and I took my X-T1 with 50-140 and X-T2 with 16-55 out to a charity walk which I've volunteered for in the past as a photographer.  My X-T1 held up great as always in the rain.  My X-T2 had issues.  

 

All was fine, but then about an hour into the event and still raining, my X-T2 was telling me that the "maximum operating temperature has been reached" and the camera would shut down.  That sounds kinda odd because it was maybe 55 degrees Fahrenheit in the rain and the X-T2 body was cold to the touch. The MENU and Q buttons either stopped working or the MENU button would pull up the Q menu.  

 

I brought it home after the event and decided to let it dry out.  When I removed the 16-55, there was no water slipping past the seal and water hadn't gotten into any of the other compartments. 

 

As of this morning, the X-T2 will initially recognize the lens mounted on it, but then will display an f number of 0, and the shutter button will fire with the slightest press, not even focusing.  The MENU button will now pull up the menu intermittently but the Q button and focus point stick doesn't work at all. The D pad seems to work okay. 

 

Anyone else experience similar issues in the same rainy conditions?  It's almost as if water had gotten through the MENU buttons...

 

My X-T1 has been through some pretty heavy rain and cold over the past 20 months or so and is still going strong!

Link to post
Share on other sites

I would've thought that weather sealing meant it can be subjected to a light "splatter", and then swiftly back under your coat. Don't think it's designed for constant rain.

 

That's a Pentax camera you're after for that level of sealing.

 

You've been lucky with your XT1 up to now I'd guess.

Edited by Username
Link to post
Share on other sites

I would've thought that weather sealing meant it can be subjected to a light "splatter", and then swiftly back under your coat. Don't think it's designed for constant rain.

That's a Pentax camera you're after for that level of sealing.

You've been lucky with your XT1 up to now I'd guess.

I don't think so, marketed as a high end (dare I say "pro") camera with weather sealing I don't think a bit of a splash is acceptable in terms of WR.
Link to post
Share on other sites

This should give you hope.

 

It's a long thread, with lots of people thinking FUJI wouldn't cover water damage (which is oddly enough explicitly NOT covered in their warranty and thus gives the company a very big "out").

 

https://www.dpreview.com/forums/post/58675407

 

In the end FUJI covered it.

 

Let us know what happens please.

 

Peter

 

www.kma438.com

Link to post
Share on other sites

Here is that other forums posters final report:

 

As you all know, Fujifilm is handling my repair under warranty and I will receive my camera on Monday. Some of you were asking for details on the cause and damage assessment. Below is an email I received from Fujifilm:

Your X-T2 body was evaluated by our technical staff and upon inspection moisture was found inside the camera body. This moisture had permeated some key components and was related to the camera malfunction you experienced. Although your camera is dust/moisture "resistant" and is weather sealed, it must have been exposed to a good amount of moisture. Body is not "water proof". In this case, we gave you the benefit of the doubt and decided to handle your service request under warranty at no charge. We appreciate your business.

Though Fujifilm is covering my repair under warranty it was done so by giving me the "benefit of the doubt." Therefore, this appears to be a subjective decision by Fujifilm to cover my repair under warranty. I wonder under what conditions Fujifilm would not cover repair of moisture damage under warranty? It appears that covering moisture damage under warranty is still a vague issue. Then again, for all we know, Fujifilm could be covering all moisture damage under warranty. Anyway, I'm thrilled that Fujifilm covered the repair and I have a very positive impression of Fujifilm and their customer service.

Link to post
Share on other sites

  • 1 month later...
  • 2 weeks later...

Well, I finally got my X-T2 back and unfortunately I had to pay for the repair.  Lesson learned.  At least with the X-T2, I'll be using a rain cover.  Still not worried about the X-T1.  A handful of downpours in a row and it's still working like new!

 

Sorry to hear that. Did they say what they repaired? How much did you have to pay?

Link to post
Share on other sites

Sorry to hear that. Did they say what they repaired? How much did you have to pay?

 

All it said was "liquid damage".  I basically ended up nearly paying the price of an X-T1.  I think entire insides of my X-T2 were replaced because the camera now has a completely brand new serial number.  It's possible that because I opted to have the camera repaired instead of replaced with another X-T2 with similar actuations that I had to pay.  I'm not sure.  Regardless, it's nice to have my X-T2 back.

Link to post
Share on other sites

  • 4 weeks later...

Sad to hear that - it sounds strange to me, that the X-T2 is not holding through a rain-shower... I know, it is not supposed to be submerged in water - but what weather the sealing is build for, if not rain? I used my X-T1 in hours of slight rain... even my "officially not sealed" Yongnuo 560 worked without problems... rain drops are exactly, what the sealing should prevent from entering the body.

An accidental splash of water imho is no "weather", but would be splash-proof (what e.g. my mobile is).

Link to post
Share on other sites

My X-E1 also survived light rain several times ... I think Fujifilm needs a better story regarding "weather sealing"; this starts to sound like marketing with no substance.

 

@OP sorry to hear they did not honour your warranty claim. Slightly disappointing for a camera where they make such a point of the weather sealing in their sales materials.

 

"The weather resistant structure is sealed in approximately 80 places and is both dust and water resistant. Additionally it is designed to cope in temperatures as low as -10°C allowing field photography without the typical worries about the weather, season or general shooting environment."

Edited by johant
Link to post
Share on other sites

well, ask the person who did it? He is on youtube.

 

You're the one who's presenting it as proof of something.

 

And even if it did survive, it's anecdotal anyway. I've had my X-T2 in the rain for hours without issue. That doesn't mean that OP's didn't have a manufacturing defect that let water in where it shouldn't... You can pile on all the evidence that most X-T2's don't leak and all that does it make it all the more distressing that when one does leak, Fuji won't stand by the warranty for it. Shameful.

Link to post
Share on other sites

No I simply showed it to the forum ( remember forum is a place of discussion not a place to be right or wrong) I am not the one who made it, I just happened to see it on the scoop.it service which scoops all things of fuji interests.

 

http://www.scoop.it/t/fujifilm-x-pro1-x-e1-x100s

 

So, I thought of bringing this to the discussion. It seemed relevant to this discussion. Don’t you think?

 

If the owner is a fool and his camera no longer works I have no way to know and neither have you, that’s why I suggest you contact him to know what happened to the camera which was still working during and after the test.

 

https://www.youtube.com/channel/UCNm78q7KhQ0ncjcPpumWkRQ

 

 

This is another video with immersion of a X-pro 2.

 

Another fool? Maybe , maybe not? Do you know for sure?

 

Edited by milandro
Link to post
Share on other sites

No I simply showed it to the forum ( remember forum is a place of discussion not a place to be right or wrong) I am not the one who made it, I just happened to see it on the scoop.it service which scoops all things of fuji interests.

 

 

 

So, I thought of bringing this to the discussion. It seemed relevant to this discussion. Don’t you think?

 

If the owner is a fool and his camera no longer works I have no way to know and neither have you, that’s why I suggest you contact him to know what happened to the camera which was still working during and after the test.

 

 

 

 

This is another video with immersion of a X-pro 2.

 

Another fool? Maybe , maybe not? Do you know for sure?

 

 

 

What is your game anyway? I see you applying this same derailing tactic in many threads on the forum...

Edited by kimcarsons
Link to post
Share on other sites

my game is participating to a discussion on a forum, a place of discussion.

 

 

 

All I did was to publish a video and offer it to others to ponder about. I didn’t even dare suggesting anything other than put it to the forum’s attention.

 

What’s wrong with that? How is it derailing?

 

 

Like this second video. The maker maybe a fool doesn’t look like but it might be. Maybe not. Does anybody know? For sure?

 

Are we to take anything  and everything for granted or can we actually have doubts about anything? I am a person who tries not to have dogmas and likes to see the many sides of anything before making up my mind.

Edited by milandro
Link to post
Share on other sites

No I simply showed it to the forum ( remember forum is a place of discussion not a place to be right or wrong) I am not the one who made it, I just happened to see it on the scoop.it service which scoops all things of fuji interests.

 

http://www.scoop.it/t/fujifilm-x-pro1-x-e1-x100s

 

So, I thought of bringing this to the discussion. It seemed relevant to this discussion. Don’t you think?

 

If the owner is a fool and his camera no longer works I have no way to know and neither have you, that’s why I suggest you contact him to know what happened to the camera which was still working during and after the test.

 

https://www.youtube.com/channel/UCNm78q7KhQ0ncjcPpumWkRQ

 

 

This is another video with immersion of a X-pro 2.

 

Another fool? Maybe , maybe not? Do you know for sure?

 

I think that video,made by Fuji, would go a long way in proving that Fuji must pay for minor rain exposure damage or face a loss and humiliation in court

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Hello. Thankyou,now Is all more clear: I have take some time in your link. Let tell you. I has totaly forget this machine have "compress picture option" and not Only "compress lossless" anyway not change the experiment. RAW  and this last two format look like same result about Number of recording picture. Can tell all results in this: in raw you can make 17 pictures for second. Is wrong. Is about One single Press and wait buffer. Full 30/20/10/8 not change. After 17 Need Press again. You not can Press before "redgreen light recording Is on".   With preshot you can have 25  are more 7 pictures . The story change Only in jpg shot only. In jpg at 30 you have 30 picture but redgreen light off very Fast so you can shot very quicly. At 20 shot Is about start look like infinite shot. 60. So the best performance are this last One  about Speed and recording picture after camera working witout big limit. I want take a shot about Italy cyclet Just for passion. I think i Will use this last setting.  After Need check when battery not are full change and ambient temp.  Anyway my cam look like exactly specific about you link. Im Happy my cam working perfectly.
    • I do not use Flickr, so I do not know what their BB code is. All I did was copy the second link you provided, (starting at https: and ending at  _k.jpg — leave off the [img] and [/img] tags) and pasted it into the message. After a moment, a message popped up asking if I wanted to paste it as the image or as a plain link. I did this twice, the first time I had it paste in as the image and the second time as a link. Nothing fancy or tricky.
    • So do I just copy the BB code from flickr and paste it anywhere on the page like other forums or is there some other trick I need to perform to get it to post?
    • All software is the latest between camera and app. All settings are correct on camera. I have both lossless and uncompressed RAW files on the card in the camera. I have been up and down every reddit thread to no avail and am losing my mind… I’m doing all of the right things. It even sees my camera. It just doesn’t create the “drive” for it (see attached image screenshot).  Please Help! 

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Not sure how to delete threads, but I figured out what was wrong. In short, I was partially misunderstanding the view-mode's function. Also, the "+LCD Image Display" part requires that you have the Image Disp. setting set to anything but Off. Then it will display your last image on the LCD. If it's off, it's behavior will be exactly like the plain Eye Sensor setting.
×
×
  • Create New...