Jump to content

Problem with multi exposure on XT5

joan11

By joan11
in Fuji X-T5 / Fuji X-T50

 Share

Recommended Posts

joan11 Newbie

joan11

Posted
Posted 
Hello everyone,
I've been wondering for several weeks, looking and looking and I can't find...
On my XT5 (with up-to-date software), when I go to "shooting setting" then "multi exposure", it is impossible for me to activate multi exposure. 
If I am in "adv.", the box is grayed out and it says "filter", if I am in "bkt" the box is grayed out and it says "bkt" etc. etc.
Can anyone tell me how to activate multi exposure? The solution should be obvious but I can't find it, either on my own or on the internet... Thank you, thank you, thank you!

 

Link to post
Share on other sites
GordW Rookie

GordW

Posted
Posted

@Greybeard You can shoot the images in RAW only. The original images are saved as RAW, and the resulting multiple exposure is a .JPG, even if you have the camera set for RAW only.

@joan11 . Not sure why you can't get multiple exposures. Might be a combination of various settings, or even a bug. I suggest you back up your settings, (using XApp on your mobile device, or XAquire on your computer) and then reset the camera. If that works, you can try restoring the settings you backed up. If that doesn't work, you'll need to tweak each setting one at a time and test after each tweak.

Good Luck!

Link to post
Share on other sites
George_P Experienced

George_P

Posted
Posted

What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG.

After each shot press MENU/OK and after the last one press DISP/BACK.

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Fujiron
      Fuji Birds

      By Fujiron · Posted

      Cedar Waxwing, Oregon. X-H2s, Fuji 150-600+1.4TC.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • paul_r_h
      XT5 is so lag while shoot with AF eye tracking on

      By paul_r_h · Posted

      Have you checked the settings for jpeg? I found the camera was slow between shots. On the advice of others in this forum I turned 'clarity' tp zero and that makes it much faster. Other jpeg settings on that menu might also make it slow. Lens corrections for instance. I have them at zero because I shoot RAW. Paul
    • jerryy
      No question is too silly!

      By jerryy · Posted

      No, I was not joking. Reread her post, the first sentence is “The focus mode selector button on the front of the camera has  me baffled.” which is what I explained in my answer: the focus mode selector button. My CSM explanation is essentially the standard approach Fujifilm has taken for some time. Explaining the frame rate differences as I did to someone brand new to the camera seems an easier approach to understanding than saying it is 20fps vs 7fps. Not to mention, the following is how Fujifilm describes it: “Continuous AF: Focus is continually adjusted to reflect changes in the distance to the subject while the shutter button is pressed halfway. Use for subjects that are in motion”  https://fujifilm-dsc.com/en/manual/x-t5/taking_photo/autofocus/  You have to go to page 166 of the manual to get to a very brief explanation of CH vs CL without any context. High speed capture vs slower speed capture seems appropriate to explain so that someone that had been given the impression the top dials are needed for the csm button would realize how they work. I think it is better than saying put the csm button on S the top dial on CH and mash the shutter button — there is no example of when to use that or why. The X-T5 is a wonderful tool, but sometimes examples, humorous or otherwise, help new users understand it better when the manual does not help or when people tell new users to just leave it alone. 
    • pw-pix
      No question is too silly!

      By pw-pix · Posted

      The burst speed of the shutter is set by the CL and CH control on top of the camera, it is unrelated to the focus mode setting on the S C M control. The focus speed is not related to the burst speed setting. You might have been joking, but your post adds confusion.
    • jerryy
      No question is too silly!

      By jerryy · Posted

      This switch is for your lens’ auto-focusing. ”C” tells the body to use continuous focusing, either CL (low speed -  for slow moving puppies, kittens or kids) CH (high speed - for faster moving puppies, kittens or kids or anything that.moves quickly or frenetically). CH or CL is set using the top dial settings. The subject keeps moving and it may be tricky to keep trying to focus to get the photo using the standard compose / focus/ take the photo technique. ”S” is for single shot focusing, point at the subject, half press the shutter button to compose/ focus, then full press to take the photo. Or just push the shutter button to get the image if the situation is suitable. ”M” is for manual focusing, you twist the ring on the lens to set the focus as you want then press the shutter button to get the shot. The focus is entirely up to you, the camera treats the lens as if it does not have a motor in it. Okay, that is mostly true, there are some very old lenses such as the version one 14mm f2.8 lens that can be set to override this setting and autofous anyway, but Fujifilm has not used that design in many years. Note: There are many aids built into the camera to help you manually focus your shots. https://fujifilm-dsc.com/en/manual/x-t5/taking_photo/autofocus/ https://fujifilm-dsc.com/en/manual/x-t5/taking_photo/manual-focus/ As you can guess, this switch setting does not have to completely match the top dial settings, manual exposure settings are different than manual focusing, I am surprised you were told not to mess with it. p.s. You may want to pose your questions in the dedicated X-T5 section to get quicker responses from the X-T5 users.  
×
×
  • Create New...