Jump to content

Infrared with X-T1 IR


Guest

Recommended Posts

Finally, the last Sunday, I found some time to take my X-T1 IR for a walk. Not so far - just to the wood next to my home. This time black & white, but as I set my camera to write both RAW and BW, probably I will post also the color versions soon. You can see some pictures here:

 

http://eng.roguski.eu/2016/09/27/fujifilm-x-t1-ir-black-white-in-infrared/#more-145

 

I used 35mm f/2 - well, probably XF 10-24 would be more comfortable, but first tests have shown definitely that this lens is really poor for IR and ruins all the pictures. So now I have been thinking very hard what wide lens to use for IR.

Link to post
Share on other sites

What problem do you get with the 35mm f/2 for infrared? Looking at the images, I can't see any hotspots, so just wondered...

35mm works fine - I just need a bit wider option. The 10-24 does not work - it shows huge hot spot in the center, very sharp and visible at 10mm and a bit softer at 24mm.

Link to post
Share on other sites

  • 2 years later...

Hello all, similar situation (X-T10 IR converted to 720nm) difficulties finding best lenses-tried numerous ones with poor effects, consulted numerous specialists Inc.: Kolarvision & Jasonfriend websites. I can't really justify purchasing the Zeis 12mm or Fuji 14mm-though would love to.

I understand the Samyang/Rokinon 10mm is worthwhile considering-but am enquiring if anyone has used a 7artisans 12mm for IR photography? they look reasonable, get decent reviews & are well priced. many thanks for your advice

Regards andy p

Link to post
Share on other sites

Based on personal experience, good IR lenses are: 14/2.8; 16/1.4; 23 (both versions); 35/1.4; 35/2 (up to f/8); and 50-140/2.8.  Other wide angles (10-24/4, Samyang 8 fisheye and 12) have bad hot spots.  Sadly, if you want a wide angle lens for IR photography, the number of choices are limited.  

Link to post
Share on other sites

Hello & thank you  for your advice-a good list to note

Agree, not straightforward-I had a Nikon D70 IR converted to 650nm back from the day & used it frequently (to reasonable results) with a cheap dx 18-55 lense. Alas, not the same luck with Fuji (I changed systems completely 3 years ago) though I do prefer their bodies/lenses-they simply have more 'substance' 

I don't know how many lenses/websites/enquiries I've made over the last 6 months. I've purchased several lenses/bodies of eBay-only to send them back sorrowfully; due to the notorious hotspots at higher f stops. I'll be sending an xc 15-45 back tomorrow-which I bought on a recommendation from a pro. photographer who blogs about IR  too

My 2 lenses (10-24 & 18-55)  are great on the X-T2, but on the X-T10 are absolutely disastrous. The challenge is a decent wide-angle (ultra) lense is £400 upwards (I'm thinking 14mm, 18-135mm or Zeiss Touit 12mm) which compared to the price of the body (£290) is quite an offset; hence my 7artisans enquiry

If I am unable to get positive feedback about the 7artisans, I think I'll sell the 18-55 & purchase an 18-135 which will kill 2 birds; or get flush & buy the Zeiss!  Thank you again for your advice (I'll check their prices on eBay) 

regards andy p 

PS-do you know if ND filters will work with an IR converted body? 

Link to post
Share on other sites

4 hours ago, andy peet said:

...

If I am unable to get positive feedback about the 7artisans, I think I'll sell the 18-55 & purchase an 18-135 which will kill 2 birds; or get flush & buy the Zeiss!  Thank you again for your advice (I'll check their prices on eBay) 

...

Forget about 18-135 for infrared photography in color - look here: http://eng.roguski.eu/2019/04/22/sunny-afternoon-on-the-banks-of-the-vistula/

This lens can be used for B&W infrared only. The hotspot is huge and awful.

Link to post
Share on other sites

1 hour ago, andy peet said:

Hello & thank you. unfortunately, i cannot see any hotspots on your 2 colour images? regards andy p 

If you have closer look at the center of each image, you will see pink-ish tint on the foliage - it should be white and not pink.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...