Jump to content

Best lens for X pro 1 as a 2nd body ( main X pro 2)


Recommended Posts

Now that I have played with my X pro2 for I while, it would be nice to have another body/lens to carry with it. I still have my X pro 1. I was thinking that my 14mm F2.8 would be good. But maybe not.

 

I have 56 , 35 (1.4) , 23  and a 50-200.

 

I would like to get the best use of my X pro 2 so I will probably use the 56 with that. Mostly people and landscape, so fast focus is not a requirement.

 

Any suggestions ( with reasons) would be helpful. 

Link to post
Share on other sites

Thanks guys for the feedback. I should have been a bit clearer on my question. I was thinking more technical than ergonomic. 

 

I did have an 18-55 with my XP1 when I bought it, but I rarely used it so I sold it. My most used lenses would be in this order. 35 (1.4) 14, 55-200, 56, 23. 23 is my least used, because I also have an 100S that I take everywhere, which has the 23. I love the lens, but just don't use it much.

 

Out of the the lenses, I have, I was wondering which will perform better with the XP1 sensor. I want to take advantage of the sensor in the XP2, so I am thinking that longer focal lengths will allow this, plus when cropping you won't lose as much. Plus the longer lenses will auto focus better on the XP2. ( not that I worry about that)

 

With the smaller sensor of the XP1 , less cropping. Plus I usually manual focus the 14mm anyway.

 

So technically, which one would be better on which body. I have been using the 14 on the XP1. I guess i'm going to have to head out and just do some shots with each lens on the two bodies and compare. 

Link to post
Share on other sites

  • 2 weeks later...

Thanks guys for the feedback. I should have been a bit clearer on my question. I was thinking more technical than ergonomic. 

 

I did have an 18-55 with my XP1 when I bought it, but I rarely used it so I sold it. My most used lenses would be in this order. 35 (1.4) 14, 55-200, 56, 23. 23 is my least used, because I also have an 100S that I take everywhere, which has the 23. I love the lens, but just don't use it much.

 

Out of the the lenses, I have, I was wondering which will perform better with the XP1 sensor. I want to take advantage of the sensor in the XP2, so I am thinking that longer focal lengths will allow this, plus when cropping you won't lose as much. Plus the longer lenses will auto focus better on the XP2. ( not that I worry about that)

 

With the smaller sensor of the XP1 , less cropping. Plus I usually manual focus the 14mm anyway.

 

So technically, which one would be better on which body. I have been using the 14 on the XP1. I guess i'm going to have to head out and just do some shots with each lens on the two bodies and compare. 

If it were me, I would tend to use the 14mm on the x-pro1 simply because fast AF is less critical when using ultra wide.  I do something similar sometimes by lugging along a X-E2 with a Samyang 12mm just in case.  I zone focus with it - f8 or 11 and nearly everything from 3ft to infinity looks sharp.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...