Jump to content

Recommended Posts

Any issues you have with x100s . I own x100s for 10 mouths and today I realised when I switch to manual focus,very weard noisy sound from lens sounds like focus mechanism is having rave party any idea what's is should be ? I m thinking about send camera back to wexphotograpic

Link to post
Share on other sites

  • 2 weeks later...

Hello everyone. I have a problem with a quite new Fuji X100S. If I try to acquire Focus on an object very close to the camera (in the Macro zone I would say), I get an error message : "please turn off camera and turn it on again". When switching off, there is a "motorized" sound like passing through all focus range, but sounds like a motor. Switch on again and the camera is ready to go again - everything is fine, until I try to capture an object, really close to my lens, the the problem occurs again. Anyone having the same problem? Some help, please ?!?! Thanks!

Link to post
Share on other sites

@duncansebastian :

Do you have a filter on your lens? I remember that with my X100 close-up magnification would bring the lens forward, almost out of its "barrel", and it could touch the filter. The X100 then have to be restarded.

Not sure it's your case, but it's worth mentionning I guess.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • Anyone out there have any experience/feedback on the Laowa 55 mm tilt shift? I’d be using it on the GFX 50s ii. 
    • Hi, I'm researching a gimbal to get someone as a present & they use a Fuji XS-10. I did a quick search of previous threads on gimbals but all of them seem to either get no replies or spammed by a link to an Amazon list. I'd appreciate any comments from folks who've actually used specific gimbals with the XS-10. I'm aware that some, such as certain models from Zhiyun, DJI & FeiyuTech either don't say that they are fully compatible with the XS-10 but other sites say they do work ok but some functions don't. It's quite difficult to work out which functions work & which don't. Thanks.
    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • This was snapped during a lunch.  Total shooting time—a few seconds. We so often read that a proper "portrait" should be snapped with a longer than normal lens, a low ISO to get lots of detail, and have a soft light held up above the head, and slightly to the side. The key, in my opinion, is always carry a camera.  Have your camera available to capture candid, authentic photographs.  Available light, no posing.   This portrait used 2000 ISO, the lens wide open at f4, and 1/100 sec. to stop any movement.  I didn't even take time to compose—I just snapped.  I leave the "Face Detection" on unless I'm photographing a landscape or subject other than a person. The GFX100RF has the equivalent of a 28mm lens.  The large sensor renders fine detail even at fairly high ISO ratings.  And the drawing of the lens is just perfect in my opinion.  It was set to B & W, with slightly reduced sharpness and clarity (set in-camera).  Ideal for "portraits."  Now, for some subjects I will likely increase the sharpness and clarity to the normal setting.  The camera is new, and I'm still experimenting with it.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...