Video visible on camera but not computer
-
Similar Content
-
-
Posts
-
As a work around, you could just save Focus Mode to one of the Q menu slots, or My Menu. -
I've encountered this same problem, also on an X-E4. I hadn't had any problems with the camera, I just wanted to test the procedure. Some points: - I use a PC running Windows - The version of Acquire is the latest. - I also own an X-S10 and backup and restore worked fine with that, and I'm using the same cable, etc.
-
Beauty, functionality, originality, beautiful images and optics, optics, optics. What's not to like?Welcome, dear visitor! As registered member you'd see an image here…
Simply register for free here – We are always happy to welcome new members!
-
This is just a guess, but the specifications for that monitor say it only supports 8-bit bit-depth. Most of the video outputs for the X-T3 are set to support 10-bit bit-depth. Try using the H.264 codecs, with the same frame rates, etc. and see if you get an image. edit: https://fujifilm-dsc.com/en/manual/x-t3/technical_notes/spec/index.html H.264: SD card, 4∶2∶0, 8-bit/HDMI output, 4∶2∶2, 10-bit edit, edit: Welcome to the forum. -
Last time I powered on the camera, I noticed that when in aperture priority the display of shutter speed disappears. Same if I go to speed priority, the F display disappears. Until last time I used the camera everything was fine. They now both only appear when in manual. I went through every possible menu but could not solve the problem. any help? Thank you.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.