Jump to content

Exposure Preview randomly stopped working

jake774

By jake774
in Fuji X-T5

 Share

Recommended Posts

jake774 Newbie

jake774

Posted
Posted

Hi all. The exposure preview where the bar goes up and down based on exposure, letting you know you need to make adjustments or the image will be over or under exposed, complety stopped working. It is just stuck in the middle and displays a well exposed image no matter the settings. You have no idea what the exposure will be until you take the shot and find out its too dark or overexposed. Firmware has been updated to 1.04 and did not resolve the issue. Any idea? 

Link to post
Share on other sites
SGinNorcal Contributor

SGinNorcal

Posted
Posted

Are you talking about the vertical bar that shows where your exposure compensation is set?  That graph displays whatever you have set on the exposure compensation dial and has nothing to do with the automated exposure of the camera.  If you are using manual settings that lead to over exposure, that is still going to happen if you dial down the exposure comp dial.  Its more of a fine tuning adjustment.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • kozubs
      X-T5 telephoto Options

      By kozubs · Posted

      I was laying in bed and heard a hooting outside my window and was able to get a shot of this guy.  The conditions were terrible, 1am, overcast and starting to rain so it was extremally dark.  400mm, ISO 12800, f5.6 SS 1.5s and heavily processed.  All I could make out was a dark shadow in the branches once my eyes adjusted.  The wind was also picking up so I couldn't lower the shutter speed anymore to drop the ISO.   I had to use manual focus and kept firing off shots slowing adjusting the focus each time time until it seemed in focus.  The photo is is obviously horrible but it's fun finally having some reach and very cool this owl showed up just after getting the lens.  I think I'm going to have to build some owl boxes and put them up around the property. I also need to learn to navigate through the settings in the dark.    

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Greybeard
      Themamundi

      By Greybeard · Posted

      Have you done all of these: - Set the Drive dial on top of the camera to Bracketing (BKT) - In the Shooting Menu => Drive Setting => Bkt Setting => Choose the three film simulations you want to use and (most important) - In the Shooting Menu => Drive Setting => Bkt Setting => Bkt Select : Choose Film Simulation  
    • Greybeard
      XT-4

      By Greybeard · Posted

      You have Clarity in the Image Quality menu set to something other than zero
    • Uncleants
      X-T5 Back Button focus locking. AE/AF locking as designed?

      By Uncleants · Posted

      I use back button focusing on X-T5 but only lock AF using Switch option. I have set both AF ON and AEL buttons to AF ON because I kept pressing the wrong button accidentally and I let the camera take care of AE Lock when shutter half-pressed. BTW I think Fujifilm could do also do a better job of locating the other Fn buttons particularly the one next to the shutter button as it is really difficult to get to. I;d prefer them all in a vertical line on the front so can easily feel which one I'm pressing!
    • Andy Yeoh
      XT-4

      By Andy Yeoh · Posted

      Can anyone provide me with the answer. I am new to fujifilm camera.  I am using the XT4 and in single shot mode, everytime, I take a shot, the Lcd screen will display "storing" and I have to wait for the message to disappear before I can take the next shot! Is there a way to turn this off.  
×
×
  • Create New...