Jump to content

DIY travel SD card backup tool.

Edp

By Edp
in Other Fuji X Accessories

 Share

Recommended Posts

Edp Enthusiast

Edp

Posted
Posted (edited)

Since I’m going to Spain soon, I wanted a light and effective way to back up my SD cards every day during the trip.  There were some old and no longer available devices on the market, but all had limited capacity and rather expensive... or bulky.   

I came across a neat project that uses a Raspberry Pi zero 2 (this is a much faster version of the old Pi zero) and also supports Wi-Fi.  I made one, designed a custom case for it that I 3D printed (I have files for anyone that wants to to this project), and can say it works extremely well.  
 

The device is extremely simple, plug in a target storage device (in the pictures I have an extremely tiny crucial 4 terabyte ssd drive - the square thing), plug in a card reader (in the picture it’s that very compact usb stick so no cables needed), and it will automatically back up what’s on the SD card.   It won’t overwrite files, only add new ones, and recognizes different SD cards so it makes separate folders for each unique SD card.   It has a screen that shows transfer status, and while idle shows you the ip address so you can log into it with a phone and web browser.  The thing is, with a portable battery, you can do this without even being near an outlet, and entirely in the field or on the go.   
 

pics   Lens cap for scale   

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!


 

here’s some screen shots if you want to log in   You can also get thumbnails of images, but that takes way too long to generate, so I leave that function off  


 


 

the project can be found here - https://github.com/outdoorbits/little-backup-box

the hardware portion isn’t entirely concise, if if people make this for themselves I can share what I got and from where.   The main parts list are:

raspberry Pi zero 2

four port usb hat -

https://www.adafruit.com/product/3298?gclid=Cj0KCQjwlPWgBhDHARIsAH2xdNdICMYNwWVgb1i4BRLETI_8Mrep_RZf8hiQgtu4lT8W80hEM3GsQvEaAlU1EALw_wcB

and the OLED display (make sure if you get it from adafruit to get the pigtail connector) -

https://www.adafruit.com/product/938

the best thing is, you can use any low power ssd storage drive, and if you need more space, just get more drives.   
 

for the usb card reader, I got this, that’s in the image - 

SD Card Reader, uni USB SD Card...

https://www.amazon.com/dp/B087QG75L7?ref=ppx_pop_mob_ap_share

for the large storage I am using this -

Crucial X6 4TB Portable SSD – Up...

https://www.amazon.com/dp/B08W1KDM9K?ref=ppx_pop_mob_ap_share
 

I hope this helps someone looking for an on the road backup solution, and is a tinkerer like me.  

Edited by Edp
Formatting and adding tags
Link to post
Share on other sites
  • 2 weeks later...
Edp Enthusiast

Edp

Posted
  • Author
Posted (edited)

The speed is partially dependent on the receiving device, but mainly on the raspberry Pi and the usb protocol it supports.  When building it, I happened to also have a pi4 handy.  The pi4 supports usb3.1 while the pi zero 2 supports usb2.  The pi4 is notably faster, but larger and is very power hungry.   I can power the raspberry pi zero 2 off of a solar cell!
 
I did a few tests and seem to be getting an I/o speed of 20-40mb/s vs the pi4 of about 60-80mb/s.  

Edited by Edp
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • LBAbrams
      pocket wizard and XT5?

      By LBAbrams · Posted

      Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • George_P
      Transfer X-T5 for PC wi fi...

      By George_P · Posted

      Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • grizzski
      X-T30 II Eye Sensor + LCD Image Display viewmode not working

      By grizzski · Posted

      Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • George_P
      Problem with multi exposure on XT5

      By George_P · Posted

      What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • N.Rio
      black and white (open thread)

      By N.Rio · Posted

      Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...