Jump to content

Photo taken at night with black strips


Recommended Posts

hello there! 

I'm new to photography. I was out taking photos at night today and stumbled upon a well-lit cafe restaurant taking photos of it. But the photos turned out like this - with strips of black appearing. Could someone explain how this had happened? Thanks in advance!

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

This is a guess based on your image, but from the light color and type of lights, it looks like those are LED / CFL lights, which are not constantly on but actually flicker rather rapidly, The LED lights can use a controller to change the brightness that changes how long the bulb is turned on and off. The flashes from these kinds of lifhts happens too fast for our eyes to detect and we see them as being on all the time.

Many digital cameras use what is called a rolling shutter rather than a global or leaf shutter which means the pixels are not read all at once but are read a line at a time or a pixel at a time into the buffer that “makes” the image — this is very similar to the way old crt televisions work.

Combine the light cycle time with the camera read cycle time and some lighted scenes give you sweeping dark strips in your images.

Some folks get around this by changing the aperture, others by lowering the shutter speed — may need to use a tripod with these two approaches, some by only using the mechanical shutter (mechanical shutter is said to be less affected than electronic shutter).

YMMV.

p.s. Welcome to the forum.

Edited by jerryy
Link to post
Share on other sites

Try using 1/30, 1/60, 1/125 shutter speeds (assuming this is in the U.S. — which uses the 60hz a.c. electrical frequency, other places in the world use 50hz a.c. frequency rate, so try 1/25, 1/50, 1/100 if this is there).

But note, this is just something to try, the oscillator in the lighting controllers may not be keyed into the a.c. line frequency, and may just be low cost versions that run non-standard rates. If that is so, then you will need to experiment to find the timing rate and then use similar types of shutters speeds as I listed above.

If that does not work, try shining a low powered flashlight on the scene, preferably one that has a not-led bulb. Or, pop the scene with a flash to over-power the lighting. Keep in mind these last two options can affect the white balance.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Some elements in (autofocus) lenses are „floating“, so I guess what you are experiencing is normal.
    • How do I turn off the electronic shutter in the menu - the option is grayed out and I cannot select the mechanical option
    • I'm having trouble finding a way to attach a right-angle viewfinder to the Fuji X-H1 camera. Does anyone have experience with how the angle viewfinder behaves in combination with the EVF? Is the Minolta frame diameter of the right angle viewfinder suitable for attaching to the Fuji XH1 (or XT1, 2, 3, 5)? Does anyone have knowledge about which eyepiece is compatible with the Fuji X system? Thank you in advance for any assistance and information you can provide.    
    • I purchased a gently used XF 80mm f/2.8 aspherical macro for my X-T5. Not being familiar with this lens but having had experience with the Leica T mount 60mm macro and Canon and Zeiss macros, I was surprised that I felt what might be best described as a loose lens element that shifted when I tilted the lens, even before being mounted to the camera. In manual focus mode, the lens is fine, but there is a distinct “wobble” when the lens is in autofocus mode. I reported this to the company (I bought it from KEH), and they agreed this was odd and accepted it back for a full refund. I just got a replacement lens and the same thing is happening. I’ve never had an experience in which I feel a lens element loose inside the housing. Is this normal? Should I return it (again)?
    • Old post but hope this can help. You have to make sure that exp. comp. is set to zero in P, S or A mode before you go in to manual mode. If the comp is set to, let say +5, and this is of the range for the settings in manual mode, twisting the comp dial (left dial) want do any changes. 
×
×
  • Create New...