Jump to content

Photo taken at night with black strips


Recommended Posts

hello there! 

I'm new to photography. I was out taking photos at night today and stumbled upon a well-lit cafe restaurant taking photos of it. But the photos turned out like this - with strips of black appearing. Could someone explain how this had happened? Thanks in advance!

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

This is a guess based on your image, but from the light color and type of lights, it looks like those are LED / CFL lights, which are not constantly on but actually flicker rather rapidly, The LED lights can use a controller to change the brightness that changes how long the bulb is turned on and off. The flashes from these kinds of lifhts happens too fast for our eyes to detect and we see them as being on all the time.

Many digital cameras use what is called a rolling shutter rather than a global or leaf shutter which means the pixels are not read all at once but are read a line at a time or a pixel at a time into the buffer that “makes” the image — this is very similar to the way old crt televisions work.

Combine the light cycle time with the camera read cycle time and some lighted scenes give you sweeping dark strips in your images.

Some folks get around this by changing the aperture, others by lowering the shutter speed — may need to use a tripod with these two approaches, some by only using the mechanical shutter (mechanical shutter is said to be less affected than electronic shutter).

YMMV.

p.s. Welcome to the forum.

Edited by jerryy
Link to post
Share on other sites

Try using 1/30, 1/60, 1/125 shutter speeds (assuming this is in the U.S. — which uses the 60hz a.c. electrical frequency, other places in the world use 50hz a.c. frequency rate, so try 1/25, 1/50, 1/100 if this is there).

But note, this is just something to try, the oscillator in the lighting controllers may not be keyed into the a.c. line frequency, and may just be low cost versions that run non-standard rates. If that is so, then you will need to experiment to find the timing rate and then use similar types of shutters speeds as I listed above.

If that does not work, try shining a low powered flashlight on the scene, preferably one that has a not-led bulb. Or, pop the scene with a flash to over-power the lighting. Keep in mind these last two options can affect the white balance.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...