Jump to content
❓What do Fuji X 📷 Photographers Buy Most? ❓ ×

Weird continuous "click" noise while camera turned off

ilMike_42

By ilMike_42
in Fuji X-T2 / Fuji X-T20

 Share

Recommended Posts

ilMike_42 Newbie

ilMike_42

Posted
Posted

Had a little accident with my X-T20: in the backpack with my water bottle, bottle's cap was half-open, so long story short water out of the bottle, camera wet.

Dried out the camera, all is working as intended, but only with one problem: sometimes, when I turn off the camera, the lens(es) starts clicking continuously, until I remove the battery or turn on the camera.

When I re-insert the battery, the lens restarts clicking.

Any idea what to check, or what can I do to stop this strange behaviour?

The backpack was in my car seat, so i cannot exclude a damage from hit, but it's more likely to be the water situation, I think.

 

Thanks in advantage.

 

Link to post
Share on other sites
  • 1 year later...
ccharu524 Newbie

ccharu524

Posted
Posted

@ilMike_42 did you ever resolve the issue? If so, what was the issue and what resolution did you come to?

I'm facing a similar issue (except I didn't get my camera wet) where there is a constant clicking noise (with the focus on the lens going in and out) on multiple lenses - when the camera is turned OFF. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Dants
      X-T5 serious problem that doesn't let me sleep

      By Dants · Posted

      Hi Last week during a reportage, I shot bursts from about 5 fts with one of my two X-T5s, for a total of about 100 photographs. I had mounted a Fujinon XF8mm. Everything seemed to proceed regularly without any sign of problems. When looking at the sequences in the car I realized that many photos were completely black, that is, as if I had taken with the cap in front, alternating with some perfect ones and others completely white without any detail. Back in the studio I loaded them onto the Mac and noticed that of a sequence of around 100 photographs, 49 were completely flawed, that is, almost all of them were completely BLACK and some were completely WHITE. The problem was present both on the photo of the Slot 1 card (RAF) and on the Slot 2 card (JPG) in unison, so much so that I discarded the hypothesis that it could be a problem with the memory card. So, to recap: the errors on the 49 offending photos are exactly the same, for both cards in RAF and JPG. After turning the machine off and on again, it started working perfectly again, so much so that in the following days I carried out other jobs, even with gusts, without any problem. Obviously I am waiting for a response from the support to which I sent the offending sequences. I would add that if I analyze the EXIFs of the BLACK or WHITE photos, the values and data that appear are completely normal, that is, they report exactly the same information as the photos that came out well, as if nothing had happened. 1) Before each job, I always format the cards in the machine, with the specific function that can be called up from the menu and quick keys of the XT5 2) The XT5 has Firmware version 2.03 3) The Fujinon XF-8mm lens Firmware 1.00 The problem has manifested itself, for now, only once, intermittently, that is, some faulty photos alternated with perfect ones. In the following days, on the advice of the assistance center, I put on the intervalometer and shot the camera until the card was full for a total of 1600 shots. No problems, everything is fine. What do you think about it? Has anyone had this problem?

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • jerryy
      Fall pictures

      By jerryy · Posted

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • bazmataz
      Disable exposure compensation

      By bazmataz · Posted

      In manual, exposure compensation is meaningless and the dial doesn't do anything. The exposure compensation display on the rear screen and in the EVF however changes its purpose slightly, and effectively becomes an old fashioned light meter / exposure meter. As you move the camera, it changes dynamically showing you how over/under exposed you are. It is not doing anything active - not changing a setting - simply passively showing you the result of your manual settings of F/SS/ISO you have set on the resultant exposure. You do not want to disable this. Manually change F/SS/ISO until the exposure comp scale reads 0, and you will have a perfectly manually exposed picture. You can, of course, use it to accurately over/under expose by thirds of a stop, depending on your artistic intent.
    • bazmataz
      Front Command Dial Button

      By bazmataz · Posted

      Not as such. But depending on the precise problem you are suffering from, there may be workaround. In normal shooting operation, pressing the front command dial button cycles between three functions - which you can change. If you are inadvertently switching between say aperture / exposure comp / and ISO - which I think are the default settings - you can simply set the second and third functions to 'none'... Use 'Spanner'->'Command Dial Setting'->'2'->'none', and 'Spanner'->'Command Dial Setting'->'3'->'none' Now the front command dial does nothing in normal shooting operation.
    • bazmataz
      Which of the following settings has an impact RAW files?

      By bazmataz · Posted

      Dynamic range settings of more than 100% cause the 'gain', i.e. ISO, to be lowered locally in bright areas to reduce/prevent clipping and thereby 'protecting your highlights'. SO it does affect RAW. Most other settings only affect RAW processing i.e. the JPEG. Grain affect does not affect the RAW image data, but it stored in the RAW metadata. Beware - it is difficult (arguably impossible) to 'look at a RAW file'. When you try to look at a RAW file, you are either looking at an embedded JPEG thumbnail preview, or the software that you are looking at the RAW file with is processing the RAW file on demand to generate a JPEG that it is displaying on the screen. Depending on the software, and/or its settings, it may be looking at the embedded metadata and taking the original camera settings, i.e. grain affect, into account.
×
×
  • Create New...