Jump to content

100-400 Lens slight play between body and lens?


ARFURCROWN

Recommended Posts

Hi 

I have just noticed that there seems to be a slight bit of play between the camera body and the lens not circular but a forward and backward motion,  the body is an XT2 and has no issues with other lenses, just wondered whether this was normal and I had not been aware of it before  

many thanks in advance for any feedback 

Link to post
Share on other sites


I shoot with this lens for thousands of shots of my grandsons sporting events. I am using an X-T2 and have had the combo for probably 4-5 years, I have no play between the camera and lens. I use a mono-pod for nearly all shots, and Idonotice some rotational movement between the two, there is no horizontal movement of play between the lens and camera. If you are not having the issue with other lens', then the lens mount plate out be loose. As mentioned before, you need to get this looked at in order to get in-focus results.

Link to post
Share on other sites

Thanks for the feedback surprisingly I do not seem to have any focussing issues at all but I'll have a look at the mounting plate to see if the movement is there, as I said earlier the 'wobble' is so minute  we are talking about the thickness of a piece of  masking tape 

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

On 9/1/2022 at 2:57 AM, jwascher said:


I shoot with this lens for thousands of shots of my grandsons sporting events. I am using an X-T2 and have had the combo for probably 4-5 years, I have no play between the camera and lens. I use a mono-pod for nearly all shots, and Idonotice some rotational movement between the two, there is no horizontal movement of play between the lens and camera. If you are not having the issue with other lens', then the lens mount plate out be loose. As mentioned before, you need to get this looked at in order to get in-focus results.

thanks for the feedback I have checked the lens mount plate and the screws at the bottom of the lens were not tight I have retightened and the wobble is no more hopefully it is fixed but I shall keep my eye on it 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...