Jump to content

Card error camera freezes


Rufo

Recommended Posts

Hello everyone,

I have a Fuji XT4 and yesterday I had the first issue since I got the camera. I was filming 4k with two Lexar Professional 128gb 1667x cards in the slots. 

I had the camera on but I was not filming and suddenly I read: Card 2 error. Then the camera stopped responding, didn't turn on nor off. I was using official fuji battery (which was almost fully drained) and I put another battery this time a Patona but the camera did not turn on. Then I changed both cards with new ones (same Lexars) and the camera started to work again. I noticed that I forgot to format the card in the 2nd slot before using, so it had a bit of old footage on. I hope the footage is not corrupted. I did not update the firmware yet, so I still have the 1.40 version.

Did anyone have the same issue and know how to avoid in the future? I really do not want this to happen again while working.  

Thanks a lot.

 

Edited by Rufo
Link to post
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...