Jump to content

XT3 freeze, screen unresponsive 2022


joojhom

Recommended Posts

My XT3 froze while i was changing wb in the menu after a day shooting in direct sunlight and hot weather. SD card is Lexar 1066x 120mb/s write. No overheating warning popped up or any form of high temp warning, but camera was very warm. The screen was unresponsive and would not turn off after i had turned it off. I was in the car with air conditioning when this happened so it was cooling down. The shutter still worked when i pressed it but no photo was written to the card. 

Link to post
Share on other sites

I can't  say that the sd card is the cause in your case but I had intermittent freezes which turned out to be a faulty Lexar card. Note that you will have to replace both cards to try it  as one card will hang both. I don't buy Lexar cards any more.

Link to post
Share on other sites

On 7/7/2022 at 2:53 PM, BobJ said:

I can't  say that the sd card is the cause in your case but I had intermittent freezes which turned out to be a faulty Lexar card. Note that you will have to replace both cards to try it  as one card will hang both. I don't buy Lexar cards any more.

it doesnt seem to be the fault of an sd card thoughy as i was in the settings changing white balance and no orange transfer light was on, the screen just froze and wont turn off

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...