Jump to content

Focus issues


botty1963
 Share

Recommended Posts

Advertisement (gone after registration)

Hi all, took around 500 photos last week, and when I loaded them on the PC I noticed that around 80 or so had patches of the photos that were blurred. I don't believe it is anything to do with DOF based on the selected aperture, as you can see that in some of the examples there are both blurred and sharp areas in the same plane. I also know where in each I focused, using spot and back button, so I know for example that the one with the boat in it, I focused on the boat but that is out of focus. I used an X-T4 with the 16-80 and had both IBIS/OIS on.  In the one with the white building, I focused on that building but it is out of focus but with other areas that are in focus. Any ideas?

You can find examples here

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Similar Content

  • Posts

    • That's a really funny question, since it would have been easy to calculate it yourself based on the file sizes! 😜
    • Have you tried pulling out the main battery and leaving it sit on a shelf for several days to let the settings backup battery / capacitor completely discharge? This should cause the settings memory chip to lose all of its current settings and go back to the factory defaults — as of the last update. 
    • Hi lolo,   have to say I can't believe that this has not had more attention as you have done an absolutely incredible job here! I was in the exact same situation of moving from LR to C1 and really loving it except for missing my film styles pack and finding the native options available for C1 not quite there in terms of accuracy and quality. I looked all over the place before finding this post and links. What a relief!  Many thanks for your efforts here mate, very much appreciated!  cheers, LB
    • Hi there. I've just bought a second-hand X70 and I can’t seem to reset it to factory settings. When I choose reset in the menu I can't toggle to the required options, they're in red, all the commands I put in only toggles between 'ok' and 'cancel', the manual doesn't offer any help either. I would be very grateful for some help! Many thanks in advance.
    • Dimsol, I will mention something that may be very obvious to some but this happen to me. The shutter speed was set on "A" while I was testing my X-T4 in dimm light. I was under the impression that my X-T4 was taking 2 picture, but is was just the shutter opening and closing at 1/4 sec timing. Is this the case or do you actually have 2 pictures saved on memory card per press ?
×
×
  • Create New...