Jump to content

Lightroom/ACR - free ClassicChrome profile (.dcp) for X-Pro1 & X-E1!

Jackalized
 Share

Recommended Posts

Jackalized Apprentice

Jackalized

Posted
Posted (edited)

Oh, my first posting in this forum :)
 
I have something to share with you guys & gals.
 
 
I made a .dcp color profile for Lightroom and Adobe Camera Raw where I basically tried to reverse engineer the Classic Chrome simulation to have it available for my X-E1 and X-Pro1.
 
 
To install it, copy the .dcp file/files to:
 
Windows: /User/[your username]/AppData/Roaming/Adobe/CameraRaw/CameraProfiles/
Mac: /Users/[your username]/Library/Application Support/Adobe/CameraRaw/CameraProfiles/
 
 
It should appear under the Camera Calibration tab as a profile with the name "Camera Classic Chrome (Homebrew)"
 
cclr.jpg
 
 
 
 
Have fun, and feel free to post some examples :)
 
 
-> Download the X-E1 Version <-
 
-> Download the X-Pro1 Version <-



Download V5.1 (published 16.02.2016) here:

Classic Chrome Homebrew V5.1 for X-E1
 
Classic Chrome Homebrew V5.1 for X-Pro1
 
Classic Chrome Homebrew V5.1 for X100
 
Classic Chrome Homebrew V5.1 for X100S
 
Classic Chrome Homebrew V5.1 for X-T1

 

 

 

Edit: links updated (dropbox killed all links to the 'public' folder)

Edited by Jackalized
Link to post
Share on other sites
Jonsel Newbie

Jonsel

Posted
Posted

Thank you and well done, works well in LR for me with nice results from X-E1 file, see attached example

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites
  • 2 weeks later...
Jackalized Apprentice

Jackalized

Posted
  • Author
Posted

Thanks for sharing! Would an X100S version be hard to brew? ;)

 

I changed the 'uniquecamera' parameter to X100S here:

 

ClassicChrome X-E1/X-Pro1 Homebrew version for X100S

 

It's the same profile as above, only enabled for the X100S; I don't know how it will look, as I brewed my version based on the first generation x-trans sensor. I tried my version on X-T1 files and it looked very similar to the genuine profile, so it should be ok.

Link to post
Share on other sites
PascallacsaP Enthusiast

PascallacsaP

Posted
Posted

I changed the 'uniquecamera' parameter to X100S here:

 

ClassicChrome X-E1/X-Pro1 Homebrew version for X100S

 

It's the same profile as above, only enabled for the X100S; I don't know how it will look, as I brewed my version based on the first generation x-trans sensor. I tried my version on X-T1 files and it looked very similar to the genuine profile, so it should be ok.

 

Thanks so much! Really appreciate your effort!

Link to post
Share on other sites
Quattrofoto Newbie

Quattrofoto

Posted
Posted

Hi, I'm new to this forum, in fact I have just registered so I can post a question here, please accept my apologies.  I am a Fujifilm X shooter so I will no doubt contribute elsewhere anyway.

 

Right - I have an X-T1 but I also have an X-E1 which I simply adore.  I have followed the instructions to the letter given here to install the Classic Chrome profile for the X-E1 but it stubbornly refuses to work.  It just doesn't appear at all no matter where I copy the file to.  I am using the latest version of LR 5, on a Mac (I'm not a Mac genius).  What am I missing?  Can anyone help me figure it out as I'd love to have this work for my X-E1.  It's fairly important to me as I often shoot with both cameras at events/weddings etc and it's always good to have a consistent look across all images.  The presets you can download don't really cut the mustard.

 

Thank you in advance if you can help me sort this out.

 

Ste

Link to post
Share on other sites
Hector Muñoz Rookie

Hector Muñoz

Posted
Posted

Thanks for posting this, I'm a bit hellbent on getting the Classic Chrome look on my X-Pro1 images. So far I have tried four options. I believe your DCP profile is the closest, the second best would be an ICC color profile shared on DP Review. I have tried also "Classic Clonell" but it's colors are way off and Alien Skin Exposure's Kodachrome simulation is too saturated.

 

Original flat image.

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

 

Lightroom - "Camera Classic Chrome - Homebrew"

 

Capture One - An ICC color profile made from the X-T1 by Scottie Wang on DP Review Forums

Link to post
Share on other sites
Hector Muñoz Rookie

Hector Muñoz

Posted
Posted

It just doesn't appear at all no matter where I copy the file to.  

 

Are you sure you are putting the DCP file on the correct folder? Are there other DCP files on this folder?

 

If you installed it correctly the Camera Profile will appear only when the RAF file was shot with the specific camera. If you downloaded the X-E1 version and try to use them on X-Pro1 images it will not appear. Also be sure to be looking for the profile at the very bottom of the develop settings column, in the Camera Calibration - Profile section.

Link to post
Share on other sites
Quattrofoto Newbie

Quattrofoto

Posted
Posted

I have downloaded the file for the X-E1, and I have put it in /Users/[your username]/Library/Application Support/Adobe/CameraRaw/CameraProfiles/ and I have also only tried to use it with .RAF files from an X-E1, but it doesn't appear in the drop down in camera profile section.  I'm at a complete loss!

 

The only thing I have noticed is in my CameraProfiles folder, instead of a list of .dcp files there is an Index.dat file, and two folders, 'Adobe Standard' and 'Camera'  Inside Camera there is a long list of folders with camera names, inside each is a .dcp file.  There wasn't a folder in there for the X-E1, so at first I just copied the file to the 'Cameras' folder, it didn't work so I thought if I created a folder in there called Fujifilm X-E1 and dropped the file into that it might work, but it didn't. There is still a copy on its own in the parent 'CameraProfiles' folder too, I would have thought one of them would have worked?

 

Thanks,

Ste

Link to post
Share on other sites
Hector Muñoz Rookie

Hector Muñoz

Posted
Posted

Ok I made some more tests with this DCP profile along with the Capture One ICC color profile and some forced Silky Pix Classic Chrome via Exif modification.

 

I believe your simulation is pretty much up there man, I only notticed a magenta cast on the red colors. Is there a way to correct this? I'm feeling very enthusiastic about using this profile.

 

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites
Jackalized Apprentice

Jackalized

Posted
  • Author
Posted (edited)

Thanks for the feedback :)
 
I did a slight revision of the V5 version (when building the profile, I started 5 times from scratch over a couple of days... each version had several revisions). I now pushed the reds more into orange, this should get rid of the magenta tone Hector highlighted.
There are many subtle changes to hues in the genuine CC profile. It's hard to get them all right, as colors are interlinked. Change one hue und different other color tones can turn bad. I know for a fact that some slight blue tones are different in my profile compared to the original.
 
Download V5.1 here:
 

EDIT: for links, see first post in this thread
 
 
As the earlier profile, it's based on the X-Trans-I sensor. But works quite well for the X-Trans II (it seems that the base color characteristics of both sensors are very similar). I don't know how it will look applied to X100 files.
 
Thanks to my friend Nico Janssen for supplying me with tons of OOC ClassicChrome photos + their RAW files.

Edited by Jackalized
Link to post
Share on other sites
christopherH Newbie

christopherH

Posted
Posted

Thanks Jackalized for doing the revised versions and the X100. For some reason the X100 does not show up. Am at a loss as to why it doesn't as the XPro-1 does as well as the XT-1. I have tried several times and nothing shows. If you or anyone else could shed some light on this would be much appreciated. Am on a Mac.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • LBAbrams
      pocket wizard and XT5?

      By LBAbrams · Posted

      Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • George_P
      Transfer X-T5 for PC wi fi...

      By George_P · Posted

      Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • grizzski
      X-T30 II Eye Sensor + LCD Image Display viewmode not working

      By grizzski · Posted

      Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • George_P
      Problem with multi exposure on XT5

      By George_P · Posted

      What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • N.Rio
      black and white (open thread)

      By N.Rio · Posted

      Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...