Jump to content

Recommended Posts

Hello everyone!

I'm currently using both 35mm f2 and 23mm f2 and I have recently started thinking about upgrading one of them to the f1.4 version. And I was wondering on which of these lenses I will feel most difference after upgrade? Because currently I can't afford both:/

Thanks!
Krzysiek

Link to post
Share on other sites

If you talk image quality (sharpness across the frame, chr. aberrations, contrast...) the 23/f2 has most room for improvement. It's not a bad lens, but nothing special either. Wide open it has quite soft edges and corners. Both in sharpness (line pairs) as well as in contrast. The lens also suffers a bit from longitudinal chr. aberration (color fringing). The 23/1.4 MkII is much better in terms of IQ, but bear in mind it is also larger and heavier and if you use it with an X-Pro body, it blocks a fair part of the optical viewfinder.

The 35/f2 and 33/f.14 are much closer in terms of IQ. It's just that the f1.4 is a stop faster. One difference though (apart again from size and weight and OVF impact): the 35/f2 has significant focus breathing whereas the 33/f1.4 doesn't. That could be important when you do video work.

The great thing about both the 23/f2 and the 35/f2 (and the 50/f2 as well) is their compactness and usability for street photography. Robust little pocketable lenses, weather resistant, decent performance at a reasonable price. Though the f1.4 are still not large lenses, you don't put them in your jeans pocket that easily... Next to that, they're pricy. 

Edited by Herco
Link to post
Share on other sites

  • 7 months later...

I use the 23 f/2 and the 35 f/2 all the time. Having tried the f/1.4 versions, for my mind on X-T30-II bodies they are too large and in my opinion not worth the cost delta. I have heard the 23 f/2 is a little soft at the edges but I must admit I'm very happy with my copy. I think there are likely some production differences or differing ideas of good IQ here, as some people like me think the IQ is quite good and some that are not so convinced. I use the 16mm f/2.8 as well and I quite like that. Next I think it will be a 50mm f/2 rather than "upgrading" the 23mm or the 35mm. My opinion is that the compact primes are all decent enough IQ for what they are and I'll give up the possible IQ improvements of the f/1.4 versions for f/2 version's compact size and light weight (and significantly lower price). Likewise, I bought the XF 55-200 zoom over the 100-400 lens, sacrificing reach I'll rarely use for a much more compact lens, with decent enough quality, at a significantly lower price. If you take into account the loss you will make selling one of those 2 compact primes, coupled with paying considerably more for the extra aperture, to my mind it isn't worth it. The f/2 aperture is much wider than that on any of the zooms which many people use as their primary glass every day.Your mileage may vary of course.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...