Jump to content

Red House


Black Pearl

Recommended Posts

One of the reason I switched to the Fuji X-T1 was the reputation of their home grown X-Trans sensor - which from initial testing seems to be well founded. It was this one thing that had put me off my Nikon D300s, I loved the camera don't get me wrong but I couldn't live with the output any longer.

 
Below is a jpeg from the camera and a raw file I processed in ACR. The head room is huge with lots of recoverable highlight detail while lifting the shadows does very little to damage the file - preaching to the converted I realise but I have to say I'm hugely impressed.

This was taken with the Samyang 12mm f2 which I've applied a little correction to as the verticals were converging dramatically - my fault for pointing a super-wide upwards. Haven't corrected for actual distortions though as it seems good and straight right from the off. Plenty of detail too which baring in mind what is being asked of a £250 lens is remarkable.

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

 

23446703376_eab4928aa1_o.jpg

Link to post
Share on other sites

  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...