Jump to content

xpro3 travel lens


Recommended Posts

It depends a bit on how long or wide you need the view angle to be and whether you still want to use the OVF or rely on the EVF. The 16-80 is a good lens but not especially great. In terms of image quality I'd prefer the 18-55 and pair it with a 14. That makes a great travel kit with only one filter size. If you don't mind a bit bigger, the 16-55/f2.8 is even slightly better than the 18-55 and it is weather resistant. If 16 is wide enough, you can forfeit on the 14 and get around with one lens.

Fuji still has it's 18-135 which is relatively cheap as second-hand since the 16-80 arrived. It's not as good though and slower in aperture. In terms of image quality I'd rank the Fujinon standard zoom lenses as:

1. the 16-55/f2.8*

2. the 18-55/f2.8-4

3. the XC 15-50/f3.5-5.6

4. the 16-80/f4*

5. the 18-135/f3.5-5.6*

6. the XC 15-45/f3.5-5.6

The * marked will block a significant part of the OVF on an X-Pro3. Also bear in mind that the frame in the OVF gets really small  above approx. 50mm. All lenses with variable aperture only have their fastest aperture at the widest point and quickly move to a slower aperture. The 18-55 e.g. is f2.8 at 18mm, but already f3.3 at 23mm and f4 at approx. 35mm (if memory serves me well).

If you need a really longer solution than 80, the Tamron 18-300 was just introduced, but it's a bit of a big gun on an X-Pro3. Tamron has an excellent 17-70/f2.8 that seems perfect for APS-C, but we'll have to wait and see whether it will come for X-mount.

Sigma is rumored to start offering X-mount lenses in 2022 and their recent 18-50/f2.8 is highly acclaimed for Sony E-mount APS-C, so hopefully that would be one of the first.

Edited by Herco
Link to post
Share on other sites

  • 4 weeks later...

If I'm taking my X series one of my favorites to travel with is my 18-55 lens, plus the 50-140 2.8. It all depends on where I'm going, what I plan to shoot, and if I'm driving or flying.  If I'm driving I'll allow myself a few other lenses.  This coming summer I'm headed to the Yukon and Alaska for two months.  I'll be driving - self contained but even then I need to be careful as I need to load my truck with so much stuff. I "plan" on taking my 18-55, my 50-140, my 55-200 (for wildlife) and then my GFX gear.

But, that is still up in the air...

Link to post
Share on other sites

  • 3 months later...
  • 3 weeks later...
  • 3 months later...

 

Hi,

I partially agree with @Mentalo, the ideal kind of lenses for the X-PRO3 are the primes.

But I think that is same situation an all-round zoom is more flexible.

The question is that this zoom must have a good quality and a portability adapted to user needs.

In my opinion the options are as follow.

Fujinon XF 18-55/f2.8-4 or XF 16-55/f2.8

I own both lenses.
The 18-55 is a good lens, small and light so very portable. It has the stabilization and the only caveat is that it isn't weather resistant.
The 16-55 is a fantastic lens but is huge and heavy. It isn't 
stabilized but it is, IMHO, a perfect all around lens.

Fujinon XF90mmF2 R LM WR if you need a telephoto lens.

Perhaps you are thinking to a ultra-wide-angle lens, in this case you can evaluate the Laowa 10/f4 Cookie that is really small, not perfect but with a reasonable quality.

Bye
Andy

 

Link to post
Share on other sites

  • 4 months later...
  • 4 weeks later...
  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...