Problems to install FUJIFILM X Acquire on Macbook PRO "Cannot start FUJIFILM X Acquire. Another camera control application software is running."By Gilson
Greetings from Brazil!
I have 2 questions:
1) I get the following error when I try to install FUJIFILM X Acquire on Macbook PRO running macOs Big Sur 11.4: "Cannot start FUJIFILM X Acquire. Another camera control application software is running."
What can I do to be able to install?
2) Am I going to be able to use my X-T30 to recording in 4K using "Streamlabs OBS Recording Software" after I install "FUJIFILM X Acquire"?
Hoping for fujifilm to release tethered shooting for xt-30 soon, for allowing it to use it as a webcam, since webcam mode isn't working. xs-10 was having the same issue which has been fixed by fujifilm 2 days ago through a firmware update, which brought the tethered shooting ability to xs-10 and thus enabling it be used properly as a webcam. since webcam functionality is much needed in today's work lifestyle , really hope that fujifilm address this issue of xt-30, same way they addressed xs-10 , by adding functionality !. so everyone who has xt-30, let's sent feedback to fujifilm, directly or by commenting in the webcam thread in the "xt-30" pages, like we were commenting in xs-10 pages. since fujifilm care about feedback, thus hoping that they will address this quickly. have a nice day !.
I had a quick search for this and couldn’t see anything so apologies if it’s been posted before.
I have an X-T30 which I love, but the one thing that annoys me is the tripod plate needs to be removed to access the battery compartment. I’ve seen a few l brackets which allow access to the battery compartment.
I have a Peak Design tripod, so the plate needs to be unscrewed with a little key and it’s just a pain.
Can anyone recommend an l bracket which is compatible with the X-T30, allows access to the battery compartment, is decent quality and doesn’t add too much bulk?
I’d appreciate it if you could send your recommendations.
Thank you 😊
I switched over to Fuji from Nikon a few years ago and seem to have become quite a gear collector. When I used Nikon I had a Nikon D7200 and the 24mm f1.8, 35mm f1.8, 50mm 1.8, 85mm f1.8, and 60mm f2.8D lenses. Since moving to Fuji I have managed to obtain the following:
cameras: X-T3, X-T30, and recently the X100V
lenses: Laowa 9mm f2.8, Fuji 10-24mm, Fuji 16mm F2, Fuji 16mm f1.4, Fuji 16-80, Fuji 18-55, Fuji 23mm f2, Fuji 27mm, Fuji 35mm f2, Mitakon 35mm, Fuji 50mm F2, Fuji 56mm, Voigtlander 58mm f1.4, Fuji 55-200, and the Fuji 90mm (still also have the Nikon 60mm f2.8D).
So I love all of these lenses, but honestly have way too many to put them all to use as I should. I am wanting to move to a minimalist set up. I recently purchased the X100V and instantly fell in love with that camera. The one lens design has really helped me rediscover what I loved about photography upon first starting out. So the X100V is staying with me. So I am wanting to sell some of my excess and need some advice about what to keep. At the moment I am thinking about keeping the X-T3 with the Laowa 9mm, Fuji 16 f1.4, Fuji 56 f1.2, Fuji 90mm f2, Fuji 16-80mm, Mitakon 35mm, and Voigtlander 58mm f1.4 (just for the fun of manual focusing).
My question is, does this sound like a reasonable set-up? I really want to move away from zooms (except for the 16-80 for fun).
Hi all guys, a few months ago I sent this camera for repair because the r-dial command was broken (purchased in March and used 3 times), the assistance service took about 1 month and a half to repair. Yesterday after some time I used this camera again and ... same problem the command broke again 😭. Now I think I will no longer send her for assistance, I ask if anyone had the same problem as me and how they solved it or if they found a way to configure shutter speeds.
Were you trying to set the ISO above 6400? The display says you have the mechanical and electronic shutters both turned on, but if I am remembering correctly, to go beyond ISO 6400 on the older X-Ts, you can use only the mechanical shutter. On the newer models, that limit is raised to 12800, and may be higher on the X-T4 and X-S10.
What things to look at while buying pre-used Fujifilm X-T3 besides Shutter actuations and duration of ownership?Make sure the battery easily slides in and out of that compartment. If it is sticky, that battery might be starting to swell, which means you will quickly need a new battery. Also make sure all of the info displays (you will need to check the manual -- the online version at Fujifilm is the same as the paper one) turn on and off.