Jump to content

Fuji GFX 50R Black Screen when turned on

TimboMoore
 Share

Recommended Posts

TimboMoore Newbie

TimboMoore

Posted
Posted

Recently had a photoshoot and the camera turned off after 33 photos. 

When camera turned back on, screen asked for language and date settings.

Camera fires and shows exposure info, menu setting etc but will not show a live view not record images.

Could this just be a firmware failure of some sort or a deeper issue like a sensor failure?

Never has been dropped or anything of the sort.

Link to post
Share on other sites
  • 2 weeks later...
Herco Rising Star

Herco

Posted
Posted

The sensor itself is usually quite reliable. It is often the hardware or software around it that fails (firmware, connectors, batteries, motherboards...) and can cause erratic behavior. Oxidation can be a cause of problems and the GFX platform has some weak spots for that (read Roger Cicala's blogpost on Lensrentals about the GFX100). Other 'known issues' are read/write errors to card slots causing images not being stored. My advice is to check for the latest firmware and install that. Make sure that the battery is fully charged. Then completely reset the camera to factory settings and try it out. If that seems to solve the issues, configure the camera as you want and test again. If either step doesn't solve the issues, you probably need to bring it in for service. Also make sure that whenever a lens is attached you see the correct aperture being displayed and not 'f0' (which is an error message for malfunctioning camera/lens contact).

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • jerryy
      Hello from Iowa

      By jerryy · Posted

      Welcome to the forum. Here is your image:

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      If you copy the link and paste it in to your posting, you will be given the choice of having the link show up as the image (as above) or as just a link that can be clicked. https://live.staticflickr.com/65535/52678730517_54489efae3_k.jpg Great photo! Blue Jays are tricky to get good photos like you have, they tend to fly away as soon as the lens cap comes off 😀.
    • FrankWeiser
      Hello from Iowa

      By FrankWeiser · Posted

      I own the Fuji X-T1 and X-H1. I own several Fuji lenses but I tend to use 3rd party vintage manual glass which I find quite enjoyable to use. I'm testing a photo here taken from my Flickr account that showcases the Tokina 100-300mm Zoom lens with 1.4 extender. [url=https://flic.kr/p/2og3ghr][img]https://live.staticflickr.com/65535/52678730517_54489efae3_k.jpg[/img][/url][url=https://flic.kr/p/2og3ghr]300mm 1.4 blue jay[/url] by [url=https://www.flickr.com/photos/92395202@N07/]frankweiser[/url], on Flickr
    • Astigmatism
      CANNOT BACKUP OR RESTORE X-T4 SETTINGS WITH FUJI X ACQUIRE

      By Astigmatism · Posted

      Forgot to mention another thing. Mine does not work if I plug the USB cord into a USB hub. It only works if I plug the cord into one of the USB ports on my computer itself (an iMac). This surprises me because I think there's a hub built into the computer itself, which is how the computer has multiple USB ports in the first place. I think it was somebody here that suggested I try that -- sorry I don't remember who!
    • Fujiron
      xPro1 can't change aperture with fujinon 27mm

      By Fujiron · Posted

      On another forum someone suggested spraying some electrical contact cleaner into the wheel but the Fuji tech said that could risk frying the rest of the cameras electrical so I haven't tried that.
    • sfainbraun
      Potential bug in X100VI - C mode, screen going very dark

      By sfainbraun · Posted

      I have an x100VI with 1.01 firmware - did a reset already and didnt solve issue I am about to describe. Can you all see if your camera does this: Switch to C mode, step down to f16 and then press shutter half way. Does your screen go dark? I have tried playing will all settings (have had the following so quite familiar with the menus: x100, x100f, XT-2, X-Pro 2, XT-3) , only happens in C mode. If you find this can you report to Fuji @ digitalinfo@fujifilm.com. They told me they had not seen this before and that it was normal behavior because the shutter is closing, but the shutter closes in S mode as well.
×
×
  • Create New...