Jump to content

Can I increase manual focusing speed?


Garajszki Máté

Recommended Posts

Hi everyone!

I've just bought an X-T4 for videography. Previously I used a Canon 200D with an EF-S 17-55 f/2.8 lens. I used it with a follow focus and to get the focus point from 35cm to the infinity I didn't need to turn the focus wheel a full (360°) turn just about halfway (180°). On all focal length I had to turn the focus wheel for the same degree.

Now with the XF 18-55 f/2.8-4 lens when I'm on 18mm it takes the wheel 180° to turn the focus point from 30cm to the infinity. But when I'm on 55mm it takes 3 full turns (3*360°) to get the focus point to the infinity.

I have an adjustable focus gear ring so sometimes I can't pull the focus to the desired point because that little plastic thing that holds the focus ring at it's place bumps into the follow focus' gear.

Are there any solutions to this problem? Like is there a setting on the X-T4 to increase manual focusing speed so I can get from 30cm to the infinity with only a half turn (180°) or at the maximum one full turn (360°)?

Best wishes,

Máté

Link to post
Share on other sites

Unfortunately there is not. On the X-T4 there are two options re. the focus ring.

One is about the direction of rotation (CW versus CCW).

The other is about the behavior of the ring (non-linear which is standard versus linear). In non-linear mode the focus point shifts faster the faster you move the ring. However it is very uncontrolled in terms where it exactly stops, so it's useless for focus pulls. In linear mode the ring behaves regardless of how fast you turn it, but it is different per lens how much turn (in degrees) it requires to move from one point to another. On top of that it is very imprecise. So, also pretty useless.

Exception are the lenses with a clutch mechanism and a focus ring with hard stops (the 14mm, the 16/f1.4 and the old 23/f1.4). They allow for better MF control.

Settings such as Sony, Nikon, Leica and Panasonic have where you can fine-tune the behavior of the focus ring are unfortunately not available in Fujifilm cameras.

Edited by Herco
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • X Raw Studio works with image files on your computer - not the image files on the camera card
    • Hello. Thankyou,now Is all more clear: I have take some time in your link. Let tell you. I has totaly forget this machine have "compress picture option" and not Only "compress lossless" anyway not change the experiment. RAW  and this last two format look like same result about Number of recording picture. Can tell all results in this: in raw you can make 17 pictures for second. Is wrong. Is about One single Press and wait buffer. Full 30/20/10/8 not change. After 17 Need Press again. You not can Press before "redgreen light recording Is on".   With preshot you can have 25  are more 7 pictures . The story change Only in jpg shot only. In jpg at 30 you have 30 picture but redgreen light off very Fast so you can shot very quicly. At 20 shot Is about start look like infinite shot. 60. So the best performance are this last One  about Speed and recording picture after camera working witout big limit. I want take a shot about Italy cyclet Just for passion. I think i Will use this last setting.  After Need check when battery not are full change and ambient temp.  Anyway my cam look like exactly specific about you link. Im Happy my cam working perfectly.
    • I do not use Flickr, so I do not know what their BB code is. All I did was copy the second link you provided, (starting at https: and ending at  _k.jpg — leave off the [img] and [/img] tags) and pasted it into the message. After a moment, a message popped up asking if I wanted to paste it as the image or as a plain link. I did this twice, the first time I had it paste in as the image and the second time as a link. Nothing fancy or tricky.
    • So do I just copy the BB code from flickr and paste it anywhere on the page like other forums or is there some other trick I need to perform to get it to post?
    • All software is the latest between camera and app. All settings are correct on camera. I have both lossless and uncompressed RAW files on the card in the camera. I have been up and down every reddit thread to no avail and am losing my mind… I’m doing all of the right things. It even sees my camera. It just doesn’t create the “drive” for it (see attached image screenshot).  Please Help! 

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...