Jump to content

wedding shoot, recommendation needed for focus settings

shane

By shane
in General Discussion

 Share

Recommended Posts

Paul Crespel Rising Star

Paul Crespel

Posted
Posted

Hello Shane,

 

A wedding is a very important event, which can't easily be rewound and replayed for a re-shoot if you get the photos wrong. 

 

My advice to you is, if you need to ask such a question, then perhaps it would be better to have the assurance of an experienced wedding photographer present to ensure backup for any mistakes.

 

You don't get a second chance at a wedding, and if you screw up through lack of experience, you are going to disappoint the wedding couple, their family and their friends, and possibly leave yourself open to a lawsuit.

 

In a church (down the aisle), a telephoto is not ideal.  You need 21mm or 28mm to allow for low light, and the depth of field and surroundings to give the photo some context.  You don't want to blur the background in the church, you want to include it.

 

Really, think very carefully about covering the wedding until you've followed experienced wedding photographers enough to understand what is expected, and to have enough experience not to screw up.  It's a BIG responsability :)

Link to post
Share on other sites
jlmphotos Experienced

jlmphotos

Posted
Posted

Hello Shane,

 

A wedding is a very important event, which can't easily be rewound and replayed for a re-shoot if you get the photos wrong. 

 

My advice to you is, if you need to ask such a question, then perhaps it would be better to have the assurance of an experienced wedding photographer present to ensure backup for any mistakes.

 

You don't get a second chance at a wedding, and if you screw up through lack of experience, you are going to disappoint the wedding couple, their family and their friends, and possibly leave yourself open to a lawsuit.

 

In a church (down the aisle), a telephoto is not ideal.  You need 21mm or 28mm to allow for low light, and the depth of field and surroundings to give the photo some context.  You don't want to blur the background in the church, you want to include it.

 

Really, think very carefully about covering the wedding until you've followed experienced wedding photographers enough to understand what is expected, and to have enough experience not to screw up.  It's a BIG responsability :)

AGREED!  That is unless you know the couple and they've ASKED you to do the photography.  

Link to post
Share on other sites
shane Newbie

shane

Posted
  • Author
Posted

gentlemen,

Thanks for the advise regarding shooting a wedding, I do understand the stakes. Thy are clear, that they want me to do this. I do commercial work, and have shot fashion and event, so can perform when needed. I was just hoping for advice on the best focus options, my success rate with focus tracking is not impressive. I do better with back button focus, and manual focus.

regards

Shane

Link to post
Share on other sites
leifbrandt Rookie

leifbrandt

Posted
Posted

To answer what I think Shane was getting at...So far I've preferred AF-S with the low burst.  I've tried the continuous focusing mode but it was a little hit and miss.  I've only shot a couple of processionals with the fuji set up, but in decent light single focus worked fine for me.  I usually have two bodies on me...18mm and 35mm...or 23mm and 56mm...just depends a little on the venue.  I know with the AF-C focusing mode it's best to keep it to the 9 AF points in the center and do either the low or high burst mode.  The last one I shot with a x100t in AF-C and the x-t1 with the 35mm on AF-S.

 

I wasn't super familiar with the x100t and found it best to set everything manual on it.  For me when it was in Aperture priority or auto ISO, it made odd choices.  It did fine in AF-C and low burst in good light.  The XT1 did great as well.

 

I've shot on Nikon and Canon...while Nikon has the better AF speed and accuracy overall, I feel like the fuji does just as good as when I was shooting on the Canon 5d MarkIII.  Have fun, try to anticipate what's going to happen next, and have a lot of extra batteries.  

Link to post
Share on other sites
Dis Collaborator

Dis

Posted
Posted

I was just hoping for advice on the best focus options, my success rate with focus tracking is not impressive. I do better with back button focus, and manual focus.

Have you tried AF-C + zone 9 + Cl? This usually works great for me with such slow motion like aisle walking.

 

Back in manual focus days we were shooting with prefocus. Focus peak assist and continuous drive revive this technique for me.

Link to post
Share on other sites
ryan2007 Newbie

ryan2007

Posted
Posted

gentlemen,

Thanks for the advise regarding shooting a wedding, I do understand the stakes. Thy are clear, that they want me to do this. I do commercial work, and have shot fashion and event, so can perform when needed. I was just hoping for advice on the best focus options, my success rate with focus tracking is not impressive. I do better with back button focus, and manual focus.

regards

Shane

I have the same type of concern. My plan is the 16-55 mm 2.8 with a mono-pod. My thought is a zoom will allow me to recompose faster than a prime lens as who ever is walking the isle gets closer to camera position. The one thing I am thinking is to get focus confirmation. On the back of the XT-1 their is a light that occasional blinks. It is for both the SD card recording and a Warning that the exposure is a problem. In short I know if it is blinking green on the back of the camera I need to change exposure or re-focus, something is wrong.

Link to post
Share on other sites
shane Newbie

shane

Posted
  • Author
Posted

hey  newbie,

forget the zoom and monopod. you need a fast prime like the 35 1.4 or the 56 1.2 and zoom with your feet. I did testing, and it focused better when i walked backwards with the bride and groom. In the rehearsal I got to do testing in actual conditions

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • LBAbrams
      pocket wizard and XT5?

      By LBAbrams · Posted

      Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • George_P
      Transfer X-T5 for PC wi fi...

      By George_P · Posted

      Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • grizzski
      X-T30 II Eye Sensor + LCD Image Display viewmode not working

      By grizzski · Posted

      Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • George_P
      Problem with multi exposure on XT5

      By George_P · Posted

      What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • N.Rio
      black and white (open thread)

      By N.Rio · Posted

      Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...