Jump to content

XT4 Film great, stills washed out and blurred

Danstall

By Danstall
in Fuji X-T4

 Share

Recommended Posts

Danstall Newbie

Danstall

Posted
Posted (edited)

Hello,

 

Totally new to photography. Got an XT4 as entry point wanting to learn.

As a starting point I've just used everything on auto. Set stills to highest quality (but not using RAW).

 

When I take film, it's awesome great quality, just what I'd expect. If I take a still of the same scene the results are totally different. Colours way less vivid, almost washed out and cropping loses quality quickly, like it's way lower res. 

I've scoured the internet for what I'm doing wrong - but I'm out of my depth very quickly. I was just expecting 'decent' images with everything auto. Most tutorials I've watched don't really explore everything auto.

Using a Fujion XF 18-55mm Lens.

Any guidance on where to start?

 

Many thanks!

PC

Edited by Danstall
Typo
Link to post
Share on other sites
  • Danstall changed the title to XT4 Film great, stills washed out and blurred
Herco Rising Star

Herco

Posted
Posted

Couple of most likely settings.

Re. sharpness/blurriness: set the AF mode to AF-S (front of camera) and in the AF menu the AF mode to single point. Now take a photo with one object in the center covered by the green focus box. That object should be tack sharp in the photo unless your shutter speed is really low (below 1/30th). In the IQ menu set the image size to L 3:2 and the image quality to F or F+RAW.

Re. washed-out colors: press the Q button - set the film simulation to STD (Provia) and make sure that color is set to 0. S-Tone and H-Tone should be no more than -1 or +1 and switch Grain off. Make sure that you set White Balance to Auto, the aperture and shutter speed ring to A and switch on Auto ISO.

With these settings you should at least get 'normal' images. You have to check these on your computer. The LCD on the camera is not very accurate. If you did check the images on the LCD make sure that in the Set Up menu under Screen Set Up, the LCD brightness and color are set to 0.

Link to post
Share on other sites
Danstall Newbie

Danstall

Posted
  • Author
Posted
14 hours ago, Herco said:

Couple of most likely settings.

Re. sharpness/blurriness: set the AF mode to AF-S (front of camera) and in the AF menu the AF mode to single point. Now take a photo with one object in the center covered by the green focus box. That object should be tack sharp in the photo unless your shutter speed is really low (below 1/30th). In the IQ menu set the image size to L 3:2 and the image quality to F or F+RAW.

Re. washed-out colors: press the Q button - set the film simulation to STD (Provia) and make sure that color is set to 0. S-Tone and H-Tone should be no more than -1 or +1 and switch Grain off. Make sure that you set White Balance to Auto, the aperture and shutter speed ring to A and switch on Auto ISO.

With these settings you should at least get 'normal' images. You have to check these on your computer. The LCD on the camera is not very accurate. If you did check the images on the LCD make sure that in the Set Up menu under Screen Set Up, the LCD brightness and color are set to 0.

Many thanks - something worked as it is much better now.

Link to post
Share on other sites
  • 2 weeks later...
Rainer_Buddy Newbie

Rainer_Buddy

Posted
Posted

You can set the colors of your stills to your liking: Chose film simulation (example: vivid), chose contrast (example: highlights +1, shadows +1), chose color (+1??).

Question-Marks because I think that's not necessary. Probably "Someone" chose filmsimulation PRO Neg. Standard for you. Or "Advanced" and some weird setting is opted on your camera.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • LBAbrams
      pocket wizard and XT5?

      By LBAbrams · Posted

      Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • George_P
      Transfer X-T5 for PC wi fi...

      By George_P · Posted

      Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • grizzski
      X-T30 II Eye Sensor + LCD Image Display viewmode not working

      By grizzski · Posted

      Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • George_P
      Problem with multi exposure on XT5

      By George_P · Posted

      What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • N.Rio
      black and white (open thread)

      By N.Rio · Posted

      Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...