Jump to content
❓What do Fuji X 📷 Photographers Buy Most? ❓ ×

Lens Adapters & Aperture Setting...

Canuck57

By Canuck57
in Adapting lenses to Fuji X

 Share

Recommended Posts

Canuck57 Contributor

Canuck57

Posted
Posted

I'm trying to understand the unmarked aperture ring on the K&F Concept lens adapter.

I recently purchased the K&F Concept Minolta AF (Sony A) to Fuji X lens adapter to use with my old Minolta AF lenses; specifically the Minolta AF 50mm f1.7-f22.

With the adapter installed (Fujifilm X-E2S), the camera does not show the aperture selected; understandably as this is a "dumb" adapter.

The combination works very well together and I have no complaints.

The adapter has a clicked aperture ring that allows for 9 stops from fully open to fully closed.

Would the 9 stops equate to f1.7, f2, f2.8, f4, f5.6, f8, f11, f16, f22 for the Minolta AF 50mm f1.7-f22 lens?

 

Many Thanks!

Link to post
Share on other sites
  • 2 months later...
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Greybeard
      Unable to download uncompressed raw XT5 files to Lightroom

      By Greybeard · Posted

      Agree with jerryy The X-T5 is a recent camera - if you don't have the latest version of Lightroom (or if you have a subscription version and you haven't updated it recently) then it won't support the X-T5 - at a minimum you will need version 6.0 of Lightroom and version 12.0 of Lightroom Classic
    • smtche
      XS-20 Capture Device with settings

      By smtche · Posted

      Hello, with my device, I send the image to the obs with the capture card in 1080p 60 FPS video mode with automatic shutdown mode turned off. After 30-35 minutes, no signal (RGB) error occurs even though the device is on, the device behaves like it is turned off. This is a problem with a device of this quality. It is annoying to encounter this. I wonder if I need to make a different setting on the device. Webcam X application does not work for me. I need to capture the image with a capture card, please help.
    • jerryy
      Unable to download uncompressed raw XT5 files to Lightroom

      By jerryy · Posted

      I believe you need to give more information about what you are doing so that you can get some help. Such as: What computer system are you trying to download the images to, which version of its operating system? Which version of Lightroom? How are you connecting the camera to the computer? Have you tried to put the card in a card reader that is attached to the computer? Information like that. A sad smiley emoji just is not enough. p.s. Welcome to the forum.
    • larsdaniel
      X-T3 with Godox X2T-F

      By larsdaniel · Posted

      It is a frustrating problem that placing a Godox flash or trigger on a Fuji camera will not allow the camera to be in anything but TTL mode. As far as I know it is the same for all Fuji cameras, and all Godox triggers except for X1T that reportedly has a firmware that fixes the problem. This thread is a good read: https://www.dpreview.com/forums/post/62565196 Also, please write Godox an email. They need to fix it.
    • mdjaskolka
      Front Command Dial Button

      By mdjaskolka · Posted

      Hi, Does anyone know if the "button" function of the front command dial on the XT5 can be turned off?  I have a medical issue with my fingers (deformity) and I constantly hit the dial and activate the button function.  Turning the dial is not an issue.  It's just the darn "button".  Thanks in advance.
×
×
  • Create New...