Jump to content

Using manual focus lenses on Fuji X-E20, etc


Hektor Emil

Recommended Posts

I am aware of the set up of the manual focus lenses but I have a question that ought to be obvious but...You set up the lens and focus at maximum aperture. I have ordered a Meinke 50mm f2. So then you get a reading for the exposure you want and let us say it is at f22. Since the lens has a manual diaphragm you must stop down to f 22 to take the photo. Correct? This has been my difficulty using older 35mm lenses on the Fuji digital bodies.

 

Thanks for reading

Link to post
Share on other sites

I‘m using a lot of manul lenses with different cameras, including Fuji, and I still don’t understand your issue. Stopping down ‚a bit‘ means f5.6 or 8 for me at normal daylight conditions.  But even when using f18 and above under rare circumstances, after adjusting the exposure time there is no problem seeing the subject and adjusting the focus.

Link to post
Share on other sites

I am only saying that I found it difficult to shoot photos sometimes at f8 or whatever. This is precisely why people have bought auto lenses for decades and not buying preset lenses. For people to suggest that it is no different than using f2 for everything are not being honest. If the subject is static is one thing but other subjects might not be so easy 

Link to post
Share on other sites

15 hours ago, Hektor Emil said:

If the subject is static is one thing but other subjects might not be so easy 

Well, that's the point, I think. A preset or full manual aperture lens, let alone a manual focus lens, isn't ideal for fast-moving subjects for that reason, although I've managed to get a few good shots of birds in flight using one. But "managing to get a few" and "doing good stuff on a regular basis" are two different things 😺

PS Since you're using manual focus, you can also use focus peaking, and that generally solves the problem of focusing at a smaller aperture. Just change the live view setting so you're not looking at a dark viewfinder.

Edited by CatsAreGods
Add PS
Link to post
Share on other sites

Thank you! I had done some research but sometimes I might miss something or misunderstood what the writer is saying. I have been so used to auto lens. I shoot a lot of film so manual focus is not the issue. If I was foolish enough to use a Leica IIIf I would give it up for good. A Leicaflex SL will spoil anyone 🙂

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • X Raw Studio works with image files on your computer - not the image files on the camera card
    • Hello. Thankyou,now Is all more clear: I have take some time in your link. Let tell you. I has totaly forget this machine have "compress picture option" and not Only "compress lossless" anyway not change the experiment. RAW  and this last two format look like same result about Number of recording picture. Can tell all results in this: in raw you can make 17 pictures for second. Is wrong. Is about One single Press and wait buffer. Full 30/20/10/8 not change. After 17 Need Press again. You not can Press before "redgreen light recording Is on".   With preshot you can have 25  are more 7 pictures . The story change Only in jpg shot only. In jpg at 30 you have 30 picture but redgreen light off very Fast so you can shot very quicly. At 20 shot Is about start look like infinite shot. 60. So the best performance are this last One  about Speed and recording picture after camera working witout big limit. I want take a shot about Italy cyclet Just for passion. I think i Will use this last setting.  After Need check when battery not are full change and ambient temp.  Anyway my cam look like exactly specific about you link. Im Happy my cam working perfectly.
    • I do not use Flickr, so I do not know what their BB code is. All I did was copy the second link you provided, (starting at https: and ending at  _k.jpg — leave off the [img] and [/img] tags) and pasted it into the message. After a moment, a message popped up asking if I wanted to paste it as the image or as a plain link. I did this twice, the first time I had it paste in as the image and the second time as a link. Nothing fancy or tricky.
    • So do I just copy the BB code from flickr and paste it anywhere on the page like other forums or is there some other trick I need to perform to get it to post?
    • All software is the latest between camera and app. All settings are correct on camera. I have both lossless and uncompressed RAW files on the card in the camera. I have been up and down every reddit thread to no avail and am losing my mind… I’m doing all of the right things. It even sees my camera. It just doesn’t create the “drive” for it (see attached image screenshot).  Please Help! 

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...