Jump to content

Tether jpeg-s to Capture one while shooting RAW + JPEG


Recommended Posts

I usually don't even tether just connect the usb 3 cable and start shooting and Capture One imports the files. I always shoot raw, so I never needed the jpegs. But I noticed the process of importing the big files is very slow.

Now I have a job where speed is required and I have to tether  jpgs only - while also taking raws, of course, but I want them to stay only on the memory card.

 

I was looking everywhere but couldn't find ANY information about that problem.

 

Is there anybody with the same problem or maybe even with a solution?

 

BIG big thanks,

Suzan

 

Link to post
Share on other sites

hi Suzan,

I´m new in this Forum, but not new to the Fuji MF world.

What about following work around.

Use X-Acquire for the connection (you can chose which data are stored on the camera and which are stored on the computer)

and work in C1 with a hot folder.

I used this way during the days when the GFX file where not supported by C1. ( If done this with C1 V5 or V6)

thanks

Detlef

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...