Jump to content

PARTIAL PHOTOS UPLOAD

widespace

By widespace
in Fuji X-T3 / Fuji X-T30

 Share

Recommended Posts

widespace Rookie

widespace

Posted
Posted

Hello

I bought a new Fuji X-T3 and went to take some pictures, JPG + RAF.  I used two SIM cards (one as a backup).  When I got back home, I started uploading all of them to my computer (Mac).  I removed the main SIM card from the camera and plugged it into a multi/card reader, the same way I always do.  There were in total: RAF = 147 photos, and JPG = 159 photos.  I was able to upload: RAF = 75 photos (51%), and JPG = 117 photos (74%).  After those photos were uploaded, an error message appeared in the screen: THE FINDER CAN’T COMPLETE THE OPERATION BECAUSE SOME DATA IN (NAME OF THE NEXT PICTURE) CAN’T BE READ OR WRITTEN. ERROR CODE -36.  No more photos were uploaded, even when I tried several times.  I also tried doing the process one photo at a time, and also repeated the process with the second SIM card.  Same results.

Thinking that the two SIM cards were corrupted or damaged at the same time (???), I then tried to format and take some more pictures with another SIM card and to upload them to the computer.  The same situation and exact message came up over.  I am able to see all the pictures (RAF & JPG) directly from the SIM cards connected to the Mac, I just can’t upload them to it.  My frustration is that 51% of the RAF, and 74% of the JPG photos were already uploaded using the same method, devices, computer, etc., without any problem, and then just stopped.

What can I do or check for?  Is that something to do with the way the camera store the photos in the SIM card?  Again, it performed as expected PARTIALLY, and then stopped!

Thank you for your advise.

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Don Barar
      F-Log in DaVinci Resolve with MacBook Pro M1 Max

      By Don Barar · Posted

      HI Rufo, I have changed procedures.  I now use the colors space transform (CST) as my first node.  The CST is set up as follows: - Apply the CST effect to the first node. - Color Space is Rec 2020 - Input gamma is FLog - Output color space is Rec 709 - Output gamma is Gamma 2.4 All other nodes to grade the clip proceed the node that contains the color space transform. Hope this helps. Don
    • jerryy
      Trains (open thread)

      By jerryy · Posted

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      Ohio River, Kentucky - Indiana, USA Ohio River, indiana - Kentucky, USA
    • Astigmatism
      Image Stabilisation

      By Astigmatism · Posted

      Interesting, and a bit subtle. I also think it'd be better to activate on a half press. But there seems to be good reasoning behind a number of other choices, so I wonder if there's a good reason behind this one and we're just not seeing it. To some degree IS goes on and off like AF does, but this is an exception, isn't it?
    • Heccie Thump
      Image Stabilisation

      By Heccie Thump · Posted

      I couldn't find my manual so downloaded a PDF copy and did some searching.  From p146 of the manual, regarding Shooting Only stabilisation: "Image stabilization enabled only when the shutter button is pressed halfway (focus mode C) or the shutter is released." So it appears that the camera is 'working as intended' and that in AF-S the stabilisation mechanism kicks in only as you release the shutter. I think I would prefer it to activate on a half press, like it does in AF-C.
    • jerryy
      Fuji Apps hijack exposure reading

      By jerryy · Posted

      Sometime a short break can help to phrase things so that they do not sound annoying, Well that is the hope anyway, so here goes. Having that meter would be nice as well as having the histogram. But having them or not is a minor consideration in terms of what you are wanting to do because the app does not work with intervalometers. The only way you can get a time lapse sequence using the app is to manually click the shutter button, wait then click it again and so on. Even if the meter were there, you would need extremely fast reflexes to see and react to a lighting change by changing the settings and then going back to clicking the shutter button. Doing that for hours would be a feat indeed. The equipment you mention does this by analyzing several past images and predicting what settings to apply to the next incoming image. Right now the app has the live view which will tell you if an area is over or under exposed, but as far as what you are wanting to do without being able to connect the app to an intervalometer, well …
×
×
  • Create New...