Jump to content

Photos missing from sd card - but show up on/in camera.


Recommended Posts

I recently took a whole bunch of photos on the X-S10 and when I put the sd card ( Lexar premium series 64GB SDXC U1 10 )  in my iMac, they didn't show up on any programme that I tried to open them in, -  Lightroom, Exposure X6, Luminar, Fuji Raw studio, Apple photos etc. BUT, they did show up on the camera. Oddly enough I was able to transfer the jpegs via wifi to my ipad pro using Fuji Cam Remote. Is this a common occurrence? I've heard something similar has happened with other Fuji cameras such as the XT-20. and x100V.  My solution thus far, has been to reformat the SD card IN the camera and I'm hoping it doesn't happen again. ( after reformatting, they are now showing up in camera and in the various programmes - both jpegs and raw) Anyone have any experience of this ? Or found some setting I may have to change.

Thanks

 

 

Edited by jomo
typo
Link to post
Share on other sites

The raf files from the X-S10 are not yet recognized by Apple’s operating systems (Big Sur, Catalina, etc.). So any program that relies on using the underlying Apple Raw Converter — this is part of the os, will not “see” the raw files as being something they can work on. This issue is usually handled quickly by the folks at Apple in their minor os updates.

In the mean time, you should be able to open the card in the Finder, get the listing of the raf and jpg files, and copy them to your desired destination folder. Then open the raw files in any editing program that does its own X-S10 raf conversions. As far as the jpg files are concerned, they should be recognized by all of the image editors as well as being viewable in the Finder.

Edited by jerryy
Link to post
Share on other sites

Yes, for the most part that works with all the images on my card that it recognises. All the programmes I open the xs10 files in recognise the raw files are there,  but just can't preview them or convert them. What I'm talking about is a whole series of images do not show up anywhere as being on the card, from one day to the next. All the previous raw and jpeg files are there, and can be seen and found, and imported ( if not converted ) The images that could not be seen by my mac or any software, where still to be seen when I previewed all the images in camera. They could not seen anywhere else other than in / on the camera itself. They were not even seen by my ipad pro 2020 in Files when the sd card reader was attached. Every other previous image was there - except the ones that weren't !  As I said, I transferred the ' non visible' jpeg's via wifi to my ipad and I managed to save the images. But i hope this doesn't happen again. It's the first glitch I've ever really had with a Fuji camera this far. Though I found another one tonight. I was shooting in filter mode using the soft filter to shoot a christmas tree reflected in a window, and the camera just got stuck in that mode. All the dials stopped working and the image froze on the screen - then after about 30's of switching out of scene / filter mode and back - it sprung back to life. I was using the 23mm 1.4

I foresee Kaizen, on the horizon :-)

Link to post
Share on other sites

That does sound a bit odd for not being seen in your iMac's finder view ...

Try this. Put the card in your card reader and connect it to your iMac. Start the Terminal program (it is in the Utilities folder) and type in the following at the prompt:

cd /Volumes (and hit the return key).

Your card should have some name, say Untitled 1 or something like that. Type in:

cd 'Untitled 1'  (and hit the return key).

     -- the ' ' characters are there to make sure that any spaces in the name get included. If the name has spaces and you leave of the ' ' characters,  the command will not work. Type:

ls -la  (and hit the return key).

     -- this should give a file / folder listing. From here, you will need repeat the process to move to the folder you have the images in. This will take a few steps and can be combined into one command as FOR EXAMPLE:

cd '/Volumes/Untitled 1/DCIM/113_FUJI'

which will move directly all the way to the 113_Fuji folder. Then type in:

ls -la   (and hit the return key).

You should get a full listing of all files in that folder including any 'hidden' files.

Now at this point is is possible to use Terminal to copy your files to your desired destination, but that is a joy saved for another time. Right now, the thing is to be able to find the missing files.

Before quiting the Terminal listing stuff, type

cd (and hit the return key). Then use the finder to eject the card.

 

Edited by jerryy
Link to post
Share on other sites

Thanks for the detailed reply. I don't use Terminal very often, so was unaware of this function.  As it stands, I've already reformatted the card, so I don't think the missing files or old folder listings are still on the card.

Should it happen again, I will use this method to try and find them.

Thank for your help.

Link to post
Share on other sites

Hi, I didn't try silkypix, but they didn't show up in Studio Raw either. The problem was, they showed up in camera, but as soon as I plugged the sd card into any software on my mac, the images -raw or jpeg - from that shoot didn't show up anywhere, so I couldn't import them at all. There was nothing to import.  I did wifi them across to my ipad pro straight from the camera using Cam Remote from Fuji. It's all very strange.

Link to post
Share on other sites

I ran into this exact same problem as Jomo, but on my X-T3 recently. 400+ photos from a recent photo shoot were showing up on the camera, but when attempting to read the SD card on the Mac, none of the newer raw/jpeg images showed up for importing via Apple Photos, Image Capture, etc. and I also tried accessing directly on the Finder and via Terminal, but the files were not there either. I also tried to load the SD card on a Windows laptop as well, with the same issues (older photos visible, but none of the new ones). The 400 photos could only be accessed via the camera.

After turning the camera on and off a few times, the 400+ photos from the photo shoot have now completely disappeared from the camera entirely, and I did not have the opportunity to import the photos via the Cam Remote app. My hunch is that the photos were cached on disk somehow, and the cache was wiped out after a few system boots.

Does anyone have any ideas for how to recover these photos?

Given this recent nightmare, I'm thinking I will need to set the card slot setting to "BACKUP" just so I can have photos duplicated on a second SD card, but I don't know if I will run into this caching issue again on both cards.

Link to post
Share on other sites
4 hours ago, Olaf W. said:

Sounds like a corrupted file system on the SD card, or a hardware failure of the flash storage. There are repair tools that sometimes can salvage lost photos (at least some of them). Write protect the card before doing anything with it and don‘t use it in the camera anymore.

Yes, I changed the card, as it more than likely was the culprit. 

Link to post
Share on other sites
5 hours ago, sirmandy said:

I ran into this exact same problem as Jomo, but on my X-T3 recently. 400+ photos from a recent photo shoot were showing up on the camera, but when attempting to read the SD card on the Mac, none of the newer raw/jpeg images showed up for importing via Apple Photos, Image Capture, etc. and I also tried accessing directly on the Finder and via Terminal, but the files were not there either. I also tried to load the SD card on a Windows laptop as well, with the same issues (older photos visible, but none of the new ones). The 400 photos could only be accessed via the camera.

After turning the camera on and off a few times, the 400+ photos from the photo shoot have now completely disappeared from the camera entirely, and I did not have the opportunity to import the photos via the Cam Remote app. My hunch is that the photos were cached on disk somehow, and the cache was wiped out after a few system boots.

Does anyone have any ideas for how to recover these photos?

Given this recent nightmare, I'm thinking I will need to set the card slot setting to "BACKUP" just so I can have photos duplicated on a second SD card, but I don't know if I will run into this caching issue again on both cards.

This described exactly what happened to me. the old photos were there but not the new. Let's hope if it wasn't the card, that the issue will be addressed in a firmware update. Should it happen again, get them via cam remote immediately, before they disappear completely.  

Link to post
Share on other sites
8 hours ago, sirmandy said:

...

Does anyone have any ideas for how to recover these photos?

Given this recent nightmare, I'm thinking I will need to set the card slot setting to "BACKUP" ... 

Using the backup approach is a very good idea.

Sandisk works with a company that sells sd card recovery programs / apps.

https://kb.sandisk.com/app/answers/detail/a_id/4985/~/data-recovery-for-memory-cards-and-flash-drives

They have a demo version that you can use to see if it will work to get back your lost images, then buy the license to finish the job. The current cost for the program is US$ 40.

 

Link to post
Share on other sites
On 12/26/2020 at 11:47 AM, jerryy said:

Using the backup approach is a very good idea.

Sandisk works with a company that sells sd card recovery programs / apps.

https://kb.sandisk.com/app/answers/detail/a_id/4985/~/data-recovery-for-memory-cards-and-flash-drives

They have a demo version that you can use to see if it will work to get back your lost images, then buy the license to finish the job. The current cost for the program is US$ 40.

 

Thanks so much for linking the Sandisk program and refreshing my memory about this - I was actually using a Sandisk SD card which came with a free subscription to this exact software (RescuePRO Deluxe), but I had totally forgotten about it. Happy to say that after 5+ hours of recovering, I was able to use it to retrieve 523 images that I thought were wiped out. What a huge relief!

The fact that they included the subscription to the recovery software makes me concerned that this is a very frequent problem (SD card file integrity issues), otherwise they wouldn't be bundling the software with their SD cards. Not sure if it was a buffer-specific issue with the Fuji camera (X-T3) itself, as it seems like I was doing multi-bursts (~11 fps) in CH mode at the moment when the storage was corrupted (also noticed a few frames that were malformed too even after recovery).

Link to post
Share on other sites

Had the exact same problem as Jomo, pics show up on camera but, although the X-S10, when plugged into my Mac, registers on Apple Photos and Raw Capture, both programmes say no photos can be found. If I take the SD card out of camera and plug into my Mac via a card reader, all photos who up, so definitely not a problem with the card (bought from Park Cameras). Is it a problem with the camera, does anybody have a definitive answer? 

             I'm a complete novice and no tech skills whatsoever, so would appreciate any forthcoming help in the simplest terms.

Link to post
Share on other sites
8 hours ago, photo fan said:

Had the exact same problem as Jomo, pics show up on camera but, although the X-S10, when plugged into my Mac, registers on Apple Photos and Raw Capture, both programmes say no photos can be found. If I take the SD card out of camera and plug into my Mac via a card reader, all photos who up, so definitely not a problem with the card (bought from Park Cameras). Is it a problem with the camera, does anybody have a definitive answer? 

             I'm a complete novice and no tech skills whatsoever, so would appreciate any forthcoming help in the simplest terms.

Check the menu setting: Connection Setting >> PC Connection Mode >> and make sure it is set to USB CARD READER (The default settings may have it set to USB RAW CONV./BACKUP RESTORE.) Change it if necessary. Shut the camera off, turn it back on and check to make sure the setting 'stuck'. Then plug your camera into your Mac and use your photo software for the transfer. I find that using Image Capture instead of the others turns out to be easier to transfer the raw images to the computer's drive.

Link to post
Share on other sites
  • 1 month later...

Hi, Suddenly find your precious photos missing from an SD card, even though it shows as full. The shocking loss may happen irrespective of the kind of SD card you are using in Android, DSLR, tablets, or other devices. The SD card issue occurs without giving any warning of corruption or data loss.

Learn the various methods to recover missing pictures from all types of SD cards.

Source: https://www.stellarinfo.com/blog/pictures-disappeared-from-sd-card/

Edited by Shailendra
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Posts

    • The 8-16 is the 'natural' companion for the 16-55 (as is the 50-140). However, since the 'long end' of the 10-24 is definitely the 'weakest' part, the actual overlap with the 16-55 is smaller than you might think. From 20mm onwards the 10-24 becomes rather soft with low contrast. An alternative could be the 14/2.8 or if you need wider, the Zeiss Touit 12/2.8. That is actually a great lens. I've had the 50-140, but I wasn't really impressed esp. considering the price. It's a good lens though, but if I now compare to my new Nikkor Z 70-200, the difference is stunning, which is of course also part due to the camera. The 55-200 is IMO very close to the 50-140 in terms of sharpness and IQ, but of course much slower in terms of aperture and it has noisier AF (and lacks WR). Considering the price though, I regard the 55-200 as a very good lens and better suited for incidental tele work than the more expensive 50-140.
    • The X-mount on most Fuji camera models is not particularly robust in my experience. Only the ones on the X-H1 and the GFX are better. Part of the issue is the quite shallow electronic contacts. Esp. with heavier lenses. The 50-140 on an X-Pro2 gave me constant issues until I got the X-H1 (according to Fuji 25% enforced mount) and never experienced problems with the same 50-140 again. Just a little bump may throw-off the contact between lens and camera, resulting in the "turn off-on" message or the infamous "f0" message. You also may want to check whether there is some lateral or rotational tolerance between the 10-24 and the X-T4. I had to swap two times a Fuji lens: one 16-55 with a misaligned mount and one 16/1.4 with too much tolerance when mounted. Something you wouldn't expect with a premium brand...
    • I purchased the fujifilm leather case for my x100v and just leave the bottom portion off. I find that the top portion fits my adapter/filter and protects the screen. A possible option unless you only want a lens cap. Did you end up finding something that works? 
    • There are rumors about a new Fuji 18mm (=27mm FF equiv.). It is supposed to be f1.4 according these rumors, but I would love an update of the 18/f2. At f1.4 will be between the 23/f1.4 and 16/f1.4 in size and that's too big to my liking for my X-Pro2. Either way, I hope it will be significantly better than the 23/f2 or the 16/f2.8. More at the level of the 35/f2...
    • Hello everyone! I am looking for the best solution for my specific scenario/ needs. Currently I shoot with a Canon EOS M50 and have the FF-equivalent lenses for 18-35mm, 35mm, 50mm. Everything is fine and dandy with the kit, but I wish I could get just nice Jpegs out of this thing. Before I switched carreers I was a professional photographer, doing portraiture and documentary style weddings etc. Always been a FF Canon shooter. But, I was also an X-Pro1 early adopter! What pulled me in was the look and feeld of the camera (so nostalgic, "retro") but also the SOOC Jpegs. I wanted this camera to be the hassle free, pure photography camera to take everywhere and have a finished "product" after pressing th shutter button. Well, the camera was nice but lacking in many aspects, especially in speed and AF. I purchased the M50 with the 22mm F2 lens as a pocket snapshooter, added the 11-22 for wideangle work and sold my FF kit. Bought the 32mm F1.4 when it came out and like the kit a lot. It is small, lightweight and the picture quality and AF is absolutely enough for my use today. I'm a casual shooter, mainly photographing the family and outings with friends and whatever els snapshots I take. Now the thing is, the M50 takes just OK SOOC Jpegs, but nothing really worthwhile. I've tested custom picture stiles and the likes but was never satisfied with the outcome. And honestly, I don't want to work on RAWs anymore. I'm just tired of it. I want the same approach that I have when shooting film... finished product. I accept that I cannot change a whole lot with my scanned negative, but I am happy with it, because I like the tonality, the color and the imperfections. They fit together nicely and feel "real" in a sense. In the digital world I think that Fuji Jpegs come closes to what I need, so the picture quality is already there. Now I see Fuji has brought a whole bunch of new and improved cameras to the market and I am looking for something that will be the end-all be-all camera. My Requirements: Newest Sensor and Processor with Color Chrome effect Classic Neg and Acros film sim Fixed or exchangeable lens, preferably 28mm FF equiv. or around 28-45mm Bonus: Set specific Shutter Speed for Auto-ISO (Canon has a fixed threshold of 2x focal length for shutter speed, so with my 32mm lens will keep the shutter speed at or above 1/60th second which may be too slow sometimes) That's it. I don't care about APS-C, FF or MF - as long as it delivers great photos and is easy to setup and use. I was looking at the X100V as it is the easiest to grasp as a concept. The other series are so convoluted that I am honestly having a difficult time finding out which one is still a current camera or already discontinued etc.  
×
×
  • Create New...