Jump to content

Fujiflm X-T4 - AF-C (Turn off the camera and turn on again)


mlubomirov

Recommended Posts

 

Hello Fuji guys,

I have issue with camera Fujifilm x-t4(firmware 1.03), when i shoot in continuous (CH) mode(AF-C). After few shots with 18-55;16-80;56 1.2 ( no matter lenses 27, 55-200 the problem is the same), camera return message on the screen: "Turn off the camera and turn on again". I checked the battery - the problem is with full charged and half charged battery. Then, i checked the SD card with UHD 1(64GB Sandisk extreme pro) and UHD 2(Lexar 64GB (2000) and 128GB(1666), the results are the same. Same error message. Then i checked the same settings  with only one SD card - the same error. After that, i reseted the settings - the same issue again.

You can see the short video with issue.(jump after 2 min).

Link:  https://youtu.be/e88P1MyHlZc

 

And now is the question.. have someone from you the same problem?

Marin Lyubomirov

Edited by mlubomirov
Link to post
Share on other sites

I did have a similar problem with my X-T3 and a rented 90mm f2 lens. I've never had it with my other lenses. I believe, without proof, that the contact connections on lens to camera was at fault. I didn't have the problem after that with any of me lenses. When I returned the lens to rental, Fuji rep couldn't help with the problem either. 

 

Link to post
Share on other sites

  • 4 weeks later...

Great it was solved. It seems X-T4 is little "tricky" about SD cards, I have a common problem - I almost always need to insert the SD card(s) twice before Card Read error is is gone (yes I use Fujifilm recommened SD Cards, Sony UHS-II V90).
Anyway this is what is said in X-T4 user manual, Troubleshooting section about the error You had (same suggestion for all 3 errors):

FOCUS ERROR, 
LENS CONTROL ERROR or
TURN OFF THE CAMERA AND TURN ON AGAIN

Explanation:
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a Fujifilm dealer.

I would have contacted Fujifilm support if the problem had persisted.

Have a nice day and I hope Your X-T4 will work fine for You now and in future.
I have X-T4 also (I had a lot of trouble with it first and it was a "lemon" and I got a new and it has worked fine).

/Bo 

Edited by bem
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...