Jump to content

Fujiflm X-T4 - AF-C (Turn off the camera and turn on again)


mlubomirov

Recommended Posts

 

Hello Fuji guys,

I have issue with camera Fujifilm x-t4(firmware 1.03), when i shoot in continuous (CH) mode(AF-C). After few shots with 18-55;16-80;56 1.2 ( no matter lenses 27, 55-200 the problem is the same), camera return message on the screen: "Turn off the camera and turn on again". I checked the battery - the problem is with full charged and half charged battery. Then, i checked the SD card with UHD 1(64GB Sandisk extreme pro) and UHD 2(Lexar 64GB (2000) and 128GB(1666), the results are the same. Same error message. Then i checked the same settings  with only one SD card - the same error. After that, i reseted the settings - the same issue again.

You can see the short video with issue.(jump after 2 min).

Link:  https://youtu.be/e88P1MyHlZc

 

And now is the question.. have someone from you the same problem?

Marin Lyubomirov

Edited by mlubomirov
Link to post
Share on other sites

I did have a similar problem with my X-T3 and a rented 90mm f2 lens. I've never had it with my other lenses. I believe, without proof, that the contact connections on lens to camera was at fault. I didn't have the problem after that with any of me lenses. When I returned the lens to rental, Fuji rep couldn't help with the problem either. 

 

Link to post
Share on other sites

  • 4 weeks later...

Great it was solved. It seems X-T4 is little "tricky" about SD cards, I have a common problem - I almost always need to insert the SD card(s) twice before Card Read error is is gone (yes I use Fujifilm recommened SD Cards, Sony UHS-II V90).
Anyway this is what is said in X-T4 user manual, Troubleshooting section about the error You had (same suggestion for all 3 errors):

FOCUS ERROR, 
LENS CONTROL ERROR or
TURN OFF THE CAMERA AND TURN ON AGAIN

Explanation:
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a Fujifilm dealer.

I would have contacted Fujifilm support if the problem had persisted.

Have a nice day and I hope Your X-T4 will work fine for You now and in future.
I have X-T4 also (I had a lot of trouble with it first and it was a "lemon" and I got a new and it has worked fine).

/Bo 

Edited by bem
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • X Raw Studio works with image files on your computer - not the image files on the camera card
    • Hello. Thankyou,now Is all more clear: I have take some time in your link. Let tell you. I has totaly forget this machine have "compress picture option" and not Only "compress lossless" anyway not change the experiment. RAW  and this last two format look like same result about Number of recording picture. Can tell all results in this: in raw you can make 17 pictures for second. Is wrong. Is about One single Press and wait buffer. Full 30/20/10/8 not change. After 17 Need Press again. You not can Press before "redgreen light recording Is on".   With preshot you can have 25  are more 7 pictures . The story change Only in jpg shot only. In jpg at 30 you have 30 picture but redgreen light off very Fast so you can shot very quicly. At 20 shot Is about start look like infinite shot. 60. So the best performance are this last One  about Speed and recording picture after camera working witout big limit. I want take a shot about Italy cyclet Just for passion. I think i Will use this last setting.  After Need check when battery not are full change and ambient temp.  Anyway my cam look like exactly specific about you link. Im Happy my cam working perfectly.
    • I do not use Flickr, so I do not know what their BB code is. All I did was copy the second link you provided, (starting at https: and ending at  _k.jpg — leave off the [img] and [/img] tags) and pasted it into the message. After a moment, a message popped up asking if I wanted to paste it as the image or as a plain link. I did this twice, the first time I had it paste in as the image and the second time as a link. Nothing fancy or tricky.
    • So do I just copy the BB code from flickr and paste it anywhere on the page like other forums or is there some other trick I need to perform to get it to post?
×
×
  • Create New...