Jump to content

Erasing (deleting) photos in camera vs.on computer


JerryG

Recommended Posts

Hi, all. New to Fujifilm cameras, with an X-T3.  The manual, in the "Inserting Memory Cards" section, warns that photos should only be erased in the camera, not on a computer.  I want to delete hundreds of photos on my SD card to make room for new ones,  (They're all loaded on my PC and backed up in 3 places, of course.)  It would take forever to tag and delete them in camera, and seconds when it is connected to the PC via USB, which seems to work fine, as it does with other cameras.

Does anyone delete batches of photos from their SD card in Windows, and have you had any issues after doing it?  Thanks.

Link to post
Share on other sites

I guess they are worried that you might corrupt the filesystem when you delete images in a computer - the filesystems used on these cards are not as reliable as filesystems normally used on a computer. A lot of people are reluctant to delete files even using the camera.

If you do this it would be good practice to make sure all your images are backed up.

It would also be good practice to regularly move all your images off the card and format it.

Link to post
Share on other sites

For some reason Fuji cameras are quite susceptible to read/write errors on SD cards. I've had multiple issues (incl. lost images) with several different Fuji cameras, so I use the following 'workflow' to reduce the chance of error:

  • always use Fuji recommended SD cards
  • use two exact same cards if the camera has two slots
  • insert them gently straight in and out
  • format both cards in the camera before a shoot
  • regularly copy (not move!) all images on the card to your computer
  • then (re)format both cards in your camera (never on your computer)
  • do not take out one card to view images on a computer/tablet and then put it back in the camera for further shooting (I share the images via my phone to a Dropbox to view them on bigger screens. Or in the studio I work tethered.)

That way you don't have to select and delete images one by one or by group in your camera, which is a tedious process.

In general: SD cards are not meant for long-term storage of images. Just for shooting and transport to your safe storage on a computer and back-up drives.

Edited by Herco
Link to post
Share on other sites

15 hours ago, Herco said:

For some reason Fuji cameras are quite susceptible to read/write errors on SD cards. I've had multiple issues (incl. lost images) with several different Fuji cameras, so I use the following 'workflow' to reduce the chance of error:

  • always use Fuji recommended SD cards
  • use two exact same cards if the camera has two slots
  • insert them gently straight in and out
  • format both cards in the camera before a shoot
  • regularly copy (not move!) all images on the card to your computer
  • then (re)format both cards in your camera (never on your computer)
  • do not take out one card to view images on a computer/tablet and then put it back in the camera for further shooting (I share the images via my phone to a Dropbox to view them on bigger screens. Or in the studio I work tethered.)

That way you don't have to select and delete images one by one or by group in your camera, which is a tedious process.

In general: SD cards are not meant for long-term storage of images. Just for shooting and transport to your safe storage on a computer and back-up drives.

Thank you ,its help me lot and best away to avoid lost my photos 

Link to post
Share on other sites

  • 1 month later...

With stills, I had write errors when shooting panorama, CH, CL, long exposure etc and using a slower card. Had reported to Fuji here and as expected the issue was never heard of by them in spite of sending them links to the issues. But they were very helpful in loaning a camera, a faster card and they took my card to try on their camera. It was concluded by Fuji that the card was slow. And the truth is, I switched to a faster card and haven't seen the issue after that. 

Also, I never delete the images in camera or computer. I switch to read only when reading images from a computer or copying. 

Link to post
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Some elements in (autofocus) lenses are „floating“, so I guess what you are experiencing is normal.
    • How do I turn off the electronic shutter in the menu - the option is grayed out and I cannot select the mechanical option
    • I'm having trouble finding a way to attach a right-angle viewfinder to the Fuji X-H1 camera. Does anyone have experience with how the angle viewfinder behaves in combination with the EVF? Is the Minolta frame diameter of the right angle viewfinder suitable for attaching to the Fuji XH1 (or XT1, 2, 3, 5)? Does anyone have knowledge about which eyepiece is compatible with the Fuji X system? Thank you in advance for any assistance and information you can provide.    
    • I purchased a gently used XF 80mm f/2.8 aspherical macro for my X-T5. Not being familiar with this lens but having had experience with the Leica T mount 60mm macro and Canon and Zeiss macros, I was surprised that I felt what might be best described as a loose lens element that shifted when I tilted the lens, even before being mounted to the camera. In manual focus mode, the lens is fine, but there is a distinct “wobble” when the lens is in autofocus mode. I reported this to the company (I bought it from KEH), and they agreed this was odd and accepted it back for a full refund. I just got a replacement lens and the same thing is happening. I’ve never had an experience in which I feel a lens element loose inside the housing. Is this normal? Should I return it (again)?
    • Old post but hope this can help. You have to make sure that exp. comp. is set to zero in P, S or A mode before you go in to manual mode. If the comp is set to, let say +5, and this is of the range for the settings in manual mode, twisting the comp dial (left dial) want do any changes. 
×
×
  • Create New...