Jump to content

Design disaster: battery cover blocked by quick release plate


Psetel

Recommended Posts

I have a serious criticism of the X-T4 design: my Gitzo Traveler quick release plate - the smallest they make - blocks the battery door from opening fully while attached to the camera. The hinge for the door is too close to the tripod//quick release hole and the plate overlaps the hinge just enough to block it from fully opening.

The result is that I cannot remove or change my battery without removing the camera from the tripod and the quick release plate from the camera. What a pain!

Does anyone know of a Gitzo tripod head system compatible with the Traveler model tripod and that has a narrower plate where this won't be a problem? 

Thanks!

Link to post
Share on other sites

Get an Arca-swiss compatible head and go to a proper fitted plate or L-bracket. Gitzo does make some Arca-Swiss compatible heads, or you can go to a better quality head like an RRS or Acratech for similar cost.

Nobody designs for those old plate systems anymore and small cameras have always had issues with most plates, one reason why Fuji sold Acra-Swiss compatible grip/plates for their kit from day 1 of the system.

Edited by mawz
Link to post
Share on other sites

  • 10 months later...
  • 2 weeks later...
On 6/20/2021 at 4:16 PM, ascotjim said:

Same issue. I will grind/cut one end of the plate to shorten it.

That is the cheapest solution and works well. I did that with a Manfrotto QR plate. A more elegant but pricier solution would be to exchange the QR plate base (if possible, look for a screw where the base is attached to the ballhead) for an Arca Swiss baseplate and QR plate.

Link to post
Share on other sites

On 8/19/2020 at 12:57 PM, Psetel said:

I have a serious criticism of the X-T4 design: my Gitzo Traveler quick release plate - the smallest they make - blocks the battery door from opening fully while attached to the camera. The hinge for the door is too close to the tripod//quick release hole and the plate overlaps the hinge just enough to block it from fully opening.

The result is that I cannot remove or change my battery without removing the camera from the tripod and the quick release plate from the camera. What a pain!

Does anyone know of a Gitzo tripod head system compatible with the Traveler model tripod and that has a narrower plate where this won't be a problem? 

Thanks!

I'm confused...is your criticism of the X-T4 or of your Gitzo plate? Where would you have designed the battery door? Or, how would you have designed the Gitzo plate? BTW, my KES L-bracket designed for the X-T4 doesn't block anything so maybe you should check that out.

Link to post
Share on other sites

  • 4 months later...
  • 1 month later...

There's actually a really simple fix for this, and it costs just over $10.

I have a video posted on what you need and how to do it. It takes about 5 minutes to mount and you can do it on any camera.
 



Essentially, you mount a cheese plate to the bottom of your camera and it will allow you to mount the quick release plate into a new threaded hole that is away from your battery door, giving you access to the battery without having to un-mount the quick release plate.

No cutting, grinding, or modifications required.

Hope this helps!

Link to post
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
    • I used this for the latest firmware no problems. https://fujifilm-x.com/en-gb/support/download/firmware/cameras/x-t2/
×
×
  • Create New...