Jump to content

fuji XC35mm or xc16-50


jamescycling1g

Recommended Posts

The main difference will be due to the faster aperture. The 16-50 is at 35mm around f4.5, which is quite a bit smaller aperture than the f2 of the XC35. It will allow you to shoot images with better background separation (out-of-focus background) and that can change the look of an image completely. Of course it requires you to use the larger aperture (shoot at f2 or f2.8) and focus carefully on the subject and it will only work with subjects clearly seperated from the background. Less when you shoot landscapes.

I wouldn’t expect a big difference in image quality though. The XC lenses are very nice budget lenses and offer surprisingly good value for money. You might want to try a comparably priced second-hand XF35 f2. Next to the physical quality of a metal construction, there’s a slight improvement in IQ compared to the XC35. The dedicated aperture ring of the XF-lenses is crucial for me, but your mileage may vary...

Edited by Herco
Link to post
Share on other sites

1 hour ago, Herco said:

You might want to try a comparably priced second-hand XF35 f2. Next to the physical quality of a metal construction, there’s a slight improvement in IQ compared to the XC35.

don't know about the second hand market in the Netherlands, but in Austria a used XF35 is 50% more than a new XC35 and other than the outside shell and aperture ring, there is no difference in optics, so there won't be any difference in IQ

to answer to the OP: it depends what you shoot. a fast prime is always nice to have but if you don't use it because you prefer the zoom, then it's irrelevant how good it is

Link to post
Share on other sites

I have both lenses, and I like them both. I agree with Herco that you won't see much difference except at larger apertures. Two things I noticed using both lenses is that the XC35 focuses faster than the XC16-50, and the light weight and small size of the XC35 makes for a pleasant rig for mobile shooting. At the end of the day, I find the image quality at wider apertures is slightly better in the corners. 

I find that I shoot differently with the XC35. Without the option to zoom on the fly, I find myself using photographer knowledge, compositional creativity, and my feet instead of the zoom ring.

You probably don't need both lenses, but I don't regret buying both, and the XC35 woke up some of the old photographer in me. That said, I'm glad I kept the XC16-50 for its close-focus capability.   

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...