Jump to content

X-T4 firmware v 1.02 problem


bpmccammon

Recommended Posts

After updating the X-T4 firmware to v1.02 my camera now locks up after turning it on.  The LCD view is live but the EVF does not work and all buttons on the camera are locked. After about 10 seconds the EVF and buttons begin to work as normal. I don't think I am alone with this problem and I hope a fix is coming soon.  Not good.

Link to post
Share on other sites

Is it possible to download previous firmware version 1.01 from Fujifilm?
It can be worth to downgrade to that firmware version. If problem dissapear then, it must be a problem in firmware version 1.02, that is a logical conclusion I think.
Edit: I asked Fujifilm support in my country, Sweden, and they adviced not to downgrade firmware from 1.02 to 1.01, it could damage the camera they said.

/Bo

From Fujifilm firmware version history for X-T4:

Ver.1.02
Updated: 06.30.2020
The firmware update Ver.1.02 from Ver.1.01 incorporates the following issues:

- Improvement of BIS function during a movie shooting.
- The phenomenon is fixed that images, which were erased from an SD card with SIMULTANEOUS DELETE ON, are played back.
- The phenomenon is fixed that overexposure can happen in a certain shooting condition.
- The phenomenon is fixed that a camera doesn’t wake up by pressing the shutter button after auto power off worked.
- Fix of minor bugs.


Ver.1.01

The firmware update Ver.1.01 from Ver.1.00 incorporates the following issues:

- The phenomenon is fixed that the battery in the camera body cannot be charged by the bundled AC adapter when the USB POWER SUPPLY SETTING is changed to OFF from ON (default setting).
- The phenomenon is fixed that repeated turning on and off a camera delays the set time.

Edited by bem
Link to post
Share on other sites

Regarding the freeze problem on my X-T4.
I received from Fujifilm Nordic support yesterday July 16 2020:

"Of course it should not be any freeze and I have talked to one of our product specialists regarding this. It has nothing to do with the firmware, it seems to be a problem with the camera."

/Bo

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...