Jump to content

Recommended Posts

Advertisement (gone after registration)

Hi Everyone!

I have a Fuji XT-30 and I am looking to tether my camera to my Mac to be able to utilize Lightroom.

I have found this wonderful software called "FUJIFILM X Acquire" but I am unable to get it to work. I can backup my settings on my camera to my Mac but I cannot specify a "Destination Folder" it is greyed out.

I also do not have the option on my XT-30 in my SET UP > CONNECTION SETTINGS > CONNECTION MODE to select any tethered options. I only have:

  1.  USB CARD READER
  2. USB MOVIE SHOOTING AUTO
  3. USB MOVIE SHOOTING FIXED
  4. USB RAW CONV. /BACKUP RESTORE

I was wondering if any of your have utilized this setup or if there is alternate software i should be using.

Also, I was wondering if i should be connecting via Micro HDMI port or the USB C port on the XT-30?

Any help will be greatly appreciated!

Currently on:

  • macOS Catalina 10.15.5
  • FujiFilm Firmware Version: 1.20

 

Edited by Ryanito13
Link to post
Share on other sites
  • 1 month later...
  • 10 months later...
On 6/23/2020 at 12:57 AM, Ryanito13 said:

Hi Everyone!

I have a Fuji XT-30 and I am looking to tether my camera to my Mac to be able to utilize Lightroom.

I have found this wonderful software called "FUJIFILM X Acquire" but I am unable to get it to work. I can backup my settings on my camera to my Mac but I cannot specify a "Destination Folder" it is greyed out.

I also do not have the option on my XT-30 in my SET UP > CONNECTION SETTINGS > CONNECTION MODE to select any tethered options. I only have:

  1.  USB CARD READER
  2. USB MOVIE SHOOTING AUTO
  3. USB MOVIE SHOOTING FIXED
  4. USB RAW CONV. /BACKUP RESTORE

I was wondering if any of your have utilized this setup or if there is alternate software i should be using.

Also, I was wondering if i should be connecting via Micro HDMI port or the USB C port on the XT-30?

Any help will be greatly appreciated!

Currently on:

  • macOS Catalina 10.15.5
  • FujiFilm Firmware Version: 1.20

 

please post this in fujifilm x-t30 section. there is a thread for this !

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Similar Content

    • By K PRETHVIRAJ
      Hoping for fujifilm to release tethered shooting for xt-30 soon, for allowing it to use it as a webcam, since webcam mode isn't working. xs-10 was having the same issue which has been fixed by fujifilm 2 days ago through a firmware update, which brought the tethered shooting ability to xs-10 and thus enabling it be used properly as a webcam. since webcam functionality is much needed in today's work lifestyle , really hope that fujifilm address this issue of xt-30, same way they addressed xs-10 , by adding functionality !. so everyone who has xt-30, let's sent feedback to fujifilm, directly or by commenting in the webcam thread in the "xt-30" pages, like we were commenting in xs-10 pages. since fujifilm care about feedback, thus hoping that they will address this quickly. have a nice day !.
    • By Somemorr
      My problem:
      My X-t30 no longer lets me record video. Nothing happens when I push the shutter button in video mode.
      Background:
      - My main use for this camera is for recording video projects at my workplace.
      - I noticed the issue after using the camera as a webcam with a elgato camlink 4k. I had optimised the in-camera settings for use as a webcam during the past months of Zooming everyday.
      My attempted fixes so far:
      - I reverted all my in-camera settings back to my usual, non-webcam settings.
      - I updated the firmware to the latest version.
      -  Many google searches to see if anyone else has had and posted a fix to this issue. 
       
       
    • By Vahnrynox
      Anyone have an issue with the command dial T not working after the firmware update? Please help. Thank you 
  • Posts

    • Managed to answer my own question, finally. Just my newb stupidity. Looking forward to shooting with this camera!
    • I can get HSS with my following equipment, Fujifilm X-T1, Godox X1T-F remote , Manual HSS flash Godox TT600(no TLL). That is what I have and experience on. I don't advertise for any brands. You can try with the equipment you already owned.  The setting is the following: Manual setting is  1/800 sec.,  f/5.6 on the camera. With the X1T-F power on and set to Group A,m, 1/32, I am able to set in 'FP' sync (shows up only with the X1T-F turn on and on the camera) in 'Flash Function Setting'. Then set the TT600 flash to Radio slave and HSS mode(check on youtube channel for TT600 for setting if you use this equipment). The HSS may not work if the TT600 put on the camera hot shoe(need test or read manual booklet).  General speaking. you set the flash and the camera in HSS mode to get the HSS feather.  How to set is equipment dependent. From Tim's experience.  
    • I have a second issue. Ever since I loaded firmware to version 1.40 to my Fujifilm X-T30 camera body, back on May 25th, 2021, the HDMI output always mirrors the display settings, and anything there is present in the HDMI output.   Changing the 'HDMI OUTPUT INFO DISPLAY' setting to 'OFF' has no effect. https://fujifilm-dsc.com/en/manual/x-t30/menu_shooting/movie_setting/index.html#hdmi_output_info. Is this a 'bug'?  If so, can we get it fixed?  In the meantime, is there another way to get 'clean' HDMI output? Tony Becker
    • I have the same issue. Any updates on this topic?
    • Ever since I loaded firmware to version 1.40 on my Fujifilm X-T30 camera body,  back on May 25th, 2021, whenever the 'X Webcam' connection is made, Windows 10 opens Windows Explorer, and displays two new folders: 'This PC\X-T30\Live' 'This PC\X-T30\Still' On my X-T30, I can't find these 'folders' in the X-T30 'Select Folder' menu, but Windows seems to think they are available in my X-T30.   Because Windows finds and displays these two new folders the 'X Webcam' connection is made, they would be several layers easier to access than the default '100_FUJI' folder. How can I make these new folders 'selected folder' in my X-T30? Tony Becker
×
×
  • Create New...