Jump to content
waneijs

Recommended SD Cards for Fujifilm XT-4

Recommended Posts

Advertisement (gone after registration)

I am planning to purchase the new FujiFilm XT-4 when it is available in NL. 

With the launch of the XT-4 FujiFilm removed the supported SD Cards from the compatibility section on their website.
The link is still present on the XT-3 specifications website but the link is not working anymore

* 1 Please see the Fujifilm website to check memory card compatibility
https://www.fujifilm.com/support/digital_cameras/compatibility/card/x/?_ga=2.36026537.881780981.1588514698-1422211324.1588514698  

I am planning to shoot both video and stills, and I selected two SD cards of 128 GB SDXC V90 UHS-II on their specifications and price

Does anyone have any experience with those SD cards?
Is there any way I can verify with FujiFilm which 128 GB SDXC V90 UHS-II are supported or recommended by them?

W.A. Neijs

Share this post


Link to post
Share on other sites
Posted (edited)

I have used the ProGrade card on my X-T3 and been happy with the results.

The only curious problem I had was in mixing SanDisk and Prograde UHS-II cards in different slots.

So based on that experience I'd get two copies of the same card.

(Even for the X-T3 the specific card recommendations from Fuji were outdated)

Edited by Greybeard

Share this post


Link to post
Share on other sites

Yeah according to Ken Wheeler who fixed cameras, and used/owned almost every lens, Lexar is trash.  

Search YouTube videos:  All FUJIFILM.....please STOP sticking LEXAR SD cards in your Fuji.

In a email he said "USE SANDISK 300/MB ONLY".  Avoid "Prograde", and especially "Sony" and Lexar.

Until Sandisk gets their head out of their backside and makes faster cards we will just have to make due.

Some bonus advice (search YouTube)
ALL Mirrorless DON'T Please DON'T burn your mirrorless sensor!
Angry Photographer: THANKS LEXAR!! .....for BRICKING my DSLR....trash cards
 

 

Share this post


Link to post
Share on other sites
Posted (edited)

Advertisement (gone after registration)

On 6/17/2020 at 7:50 PM, Kasumi3344 said:

Yeah according to Ken Wheeler who fixed cameras, and used/owned almost every lens, Lexar is trash.  

Search YouTube videos:  All FUJIFILM.....please STOP sticking LEXAR SD cards in your Fuji.

In a email he said "USE SANDISK 300/MB ONLY".  Avoid "Prograde", and especially "Sony" and Lexar.

Until Sandisk gets their head out of their backside and makes faster cards we will just have to make due.

Some bonus advice (search YouTube)
ALL Mirrorless DON'T Please DON'T burn your mirrorless sensor!
Angry Photographer: THANKS LEXAR!! .....for BRICKING my DSLR....trash cards
 

 

I mainly use Lexar and have no problem at all ! Stop promotting only Sandisk in many threads which is not more reliable than Lexar, Proglide, Sony, etc ! Ken Wheeler is not a guru !

Edited by Pierre

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By Kasumi3344
      https://www.youtube.com/watch?v=C7zqJTzlSu0

      https://youtu.be/Bg1HrHVikiQ?t=319
      And Sony's latest debacle.

      The only photography channel I trust, has never lied about recommendations, or camera lenses and other camera accessories; Proclaims that Sandisk is the only card that people should use.  However, they are sticking to the slow, and useless V30, (useless) instead of making a V90 SDXC card for the XT-4.  Not saying it is a bad card, or bad card company, just not good enough for 4K with 400mbps video that the XT-4 can produce.

      The petition is this:  Work with Sandisk so they can give full quality SDXC cards for video use.  By that I mean V90 Sandisk SDXC cards.  People are paying big money for the junk V90 SDXC cards.  With the amount of money they are paying for the XT-4, they should get the full quality.  Not half the quality they pay for.
       
       
    • By hoosiermacdaddy
      Where can I find instructions on how to select what gets store on which card? I want to direct jpegs to one card and RAW files to the other. Thanks.
    • By tpellicer
      Hi all, 
       
      I hope someone out there can help me figure out how to get my SD card out of my XT1??? First, I'm not new, I've been using 2 XT1's for over a year. Yesterday I shot a big job for an Interior Designer and this morning when I went to copy the images the SD card will not come out. When I push on the card to eject it, there is NO movement, normally it pushes down a little then pops up. This card is stuck, no movement. I'm very nervous as I have a very important job on that card and can't risk looking any images.
       
      Please can anyone advise me how to get the card out without damaging the card?
       
      Thank you!
    • By FujiJoe
      Do both slots have to be used when shooting? I was unable to take images when one of the slots was empty.
       
      Thanx, FujiJoe
    • By dwphoto11211
      I'm having a weird anomaly with my x-t1 (and also my x-100). When I shoot in CL or CH, the files are out of order for the RAW and JPGS. I wonder if the cameras process them in a random order which messes with the metadata time stamp. I often use long strings of images in a sort of stop motion effect for video and having to sort these manually for hundreds or thousands of files is beyond tedious. 
       
      Has anyone else had this issue?
       
      I've updated all firmware, tried various sd cards and I still run into the issue.
       
      Thanks for any tips/advice-
       
      Drew
  • Posts

    • Follow these steps: - put an empty/formatted card in the camera - go into Set Up/Save Data Set-up/Frame No. : change to RENEW - take a single picture (this will be DSCF0001), turn off the camera and remove the card - copy your original picture (DSCF1478) onto the card (You could also change the name of the DSCF0001 file in your computer if you no longer have the original DSCF1478) - put this card in the camera and turn it on - before taking any pictures change RENEW
    • I have the 10. I don't think the 13 will fit. The 10 fits tightly into the bottom of the pack, which is good because it won't get shaken around.
    • Hello i just bought universal flash yongnuo yn560 III and trigger PT 04NE for my XA5 camera, but i cant use at all. I already searching on google the problem was i must change to mechanical shutter I was open fujifilm website , there is setting for shutter type in camera, but i cant found in my XA5 camera My question : 1. How to use Mechanical shutter in XA5 2. Why i cant use my universal flash   thanks in advanced
    • Can I update X-T2 firmware from ver 3.00 to ver 4.32 in one step? 
    • im new to this forum but no stranger to fuji  @LEEP sorry to hear your having issues as well!  I’ve been shooting on an xt1 since the first release, I just upgraded to the xt4 last week.  As soon as I unpacked it, fiddled with it and connected it to my phone, it prompted for a firmware update and I figured why not.... bad move? Jury is still out.  since then, randomly, maybe every third time I go to use the camera it won’t turn on. I’ll have to completely remove the battery and put it b
×
×
  • Create New...