Jump to content

Locked in panoramic mode


irishmatt12

Recommended Posts

Please help, I have an X-T1 when switching on will default to panoramic mode regardless of which mode is selected. I have updated to the new body version 5.51 and updated the lens version in case for some reason is the problem. Once turned on the camera will not respond to mode changes, except randomly. This renders the camera unusable unless you really want to take all panoramic pictures. I am at a loss. Should I take this to a repair tech or is this a software issue that I may be able to fix?  

 

Thank you all in advance.   

Link to post
Share on other sites

That does unfortunately sound like a faulty drive dial. Have to tried turning it back and forth to both extremes a few times? If some dirt has gotten in there somehow that may help. Otherwise it's most likely time for a repair.

Link to post
Share on other sites

ErikN,

I have turned it as many ways as I could, with the same result. I actually got it to work today for about ten minutes before it randomly changed to panoramic mode without cue. The manipulation of the dial feels smooth and not like it has gotten anything in there. I was hopeful that there would be something that I could do, but repair is most likely the answer.

With that in mind, as I am new to all of this, where is the best place to have this repair done? There are a few Murphy's Camera stores in my city or would it be better to send back to Fujifilm? 

Thank you again!

Link to post
Share on other sites

I don't know about the repair situation in the US. I have sent stuff in to Fujifilm here in Sweden and couple of times and they have sent it to their service center in the UK.
 

I would check with Fujifilm for an authorized repair shop, or if you know of a good serious repair shop you could ask them if they can fix it. I assume it's out of warranty? Otherwise I would check with whoever is responsible for the warranty first.

Link to post
Share on other sites

  • 1 year later...
  • 1 year later...
  • 4 weeks later...
On 12/28/2022 at 10:30 AM, akfkfme said:

Use the lock function under the 3rd gear in the menu

Litteraly created an account to thank you for this, i've been using my X100T for the better part of a year and a half because of this issue, (and also the size of a X100T vs the XT-1 with manual focus lense+ adapter) i rarely shoot any other mode than S, If i ever need to i don't mind having to go back in the menu and changing it for that specific.

Long live the forums.
 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...